EMERSON 1C31233G03事件差分顺序数字输入模块
使用命令行接口与MOTLoad的交互通过单板计算机上的串行端口通过命令行接口执行，该串行端口连接到终端或终端仿真器（例如，Windows的Hypercomm）。默认MOTLoad串行端口设置为：9600波特，8位，无奇偶校验。MOTLoad命令行界面类似于UNIX命令行shell界面。通过在MOTLoad命令行提示符下输入有效的MOTLoad命令（文本字符串）并按下回车键表示输入结束，即可启动命令。MOTLoad然后执行指定的操作。MOTLoad命令行提示的示例如下所示。MOTLoad提示会根据所使用的产品（例如，MVME6100、MVME3100、MVME7100）而变化。示例：如果在MOTLoad命令行提示符下输入了无效的MOTLoad命令，则MOTLoad将显示一条消息，说明未找到该命令。示例：MVME7100>未找到mytest“mytest”MVME7100>
Using the Command Line Interface Interaction with MOTLoad is performed via a command line interface through a serial port on the single board computer, which is connected to a terminal or terminal emulator (for example, Window’s Hypercomm). The default MOTLoad serial port settings are: 9600 baud, 8 bits, no parity. The MOTLoad command line interface is similar to a UNIX command line shell interface. Commands are initiated by entering a valid MOTLoad command (a text string) at the MOTLoad command line prompt and pressing the carriage-return key to signify the end of input. MOTLoad then performs the specified action. An example of a MOTLoad command line prompt is shown below. The MOTLoad prompt changes according to what product it is used on (for example, MVME6100, MVME3100, MVME7100). Example:If an invalid MOTLoad command is entered at the MOTLoad command line prompt, MOTLoad displays a message that the command was not found. Example: MVME7100> mytest "mytest" not found MVME7100>
