EMERSON 1C31116G03模拟输入模块
概述本章提供了有关MVME7216E转换模块功能的信息。它还包括显示组件和后面板连接器的模块图纸。5.2转换模块布局下图显示了MVME7216E转换模块上的组件布局和连接器。功能MVME7216 E转换模块用于通过紧凑型VMEbus机箱后部的I/O布线。它直接连接到机箱中的VME背板，后部过渡区域深80 mm。MVME7216E设计用于主机MVME7100板。它具有以下特点：一个5行P2背板连接器，用于从SBC传输的串行和以太网I/O四个RJ-45连接器，用于后面板I/O：四个异步串行通道两个RJ-45接口，带有集成的LED用于后面板输入/输出：两个10/100/1000以太网通道一个PIM站点，带有后面板I/O
Overview This chapter provides information on the MVME7216E transition module’s features. It also includes a drawing of the module showing the components and rear panel connectors. 5.2 Transition Module Layout The following illustration shows the component layout and connectors on the MVME7216E transition module.Features The MVME7216E transition module is for I/O routing through the rear of a compact VMEbus chassis. It connects directly to the VME backplane in chassis’ with an 80 mm deep rear transition area. The MVME7216E is designed for use with the host MVME7100 board. It has these features:One 5-row P2 backplane connector for serial and Ethernet I/O passed from the SBC Four RJ-45 connectors for rear panel I/O: four asynchronous serial channels Two RJ-45 connectors with integrated LEDs for rear panel I/O: two 10/100/1000 Ethernet channels One PIM site with rear panel I/O
