EMERSON KJ3223X1-BA1轴向振动探头
框图下图是MVME7100架构的框图。处理器MVME71000设计用于支持MC864xD（双e600核）处理器。处理器被配置为在1.067GHz或1.33GHz核心频率下操作，具有相应的DDR400MB或DDR533 DDR2内存总线。MVME7100支持处理器复位配置的上电复位（POR）引脚采样方法。当复位被解除时，处理器上的各种配置引脚的状态被采样，以确定所需的操作模式。上拉和下拉电阻器的组合用于设置选项。有些选项是固定的，有些选项可以在构建时通过安装适当的上拉/下拉电阻器来选择。有关更多详细信息和/或编程信息，请参阅第117页附录B“制造商文件相关文档”中列出的MC864xD参考手册。
Block Diagram The following figure is a block diagram of the MVME7100 architecture.Processor The MVME7100 is designed to support the MC864xD (dual e600 core) processor. The processor is configured to operate at 1.067GHz or 1.33GHz core frequency with a corresponding DDR400MB or DDR533 DDR2 memory bus. The MVME7100 supports the power-on reset (POR) pin sampling method for processor reset configuration. The states of the various configuration pins on the processor are sampled when reset is deasserted to determine the desired operating modes. Combinations of pull-up and pull-down resistors are used to set the options. Some options are fixed and some are selectable at build time by installing the proper pull-up/pull-down resistor. Refer to the MC864xD reference manual, listed in Appendix B, Related Documentation , Manufacturers’ Documents on page 117 for additional details and/or programming information.
