EMERSON KJ3221X1-EA1工控设备
J6 XMC扩展8X PCI-E至XMCSpan J4A TSEC 1、10/100/1000以太网RJ-45 J4B TSEC 2、10/100/1000 Ethernet RJ-45 J11、J12、J13、J14 J21、J22、J23 PMC1 PMC2实施所有推荐和可选的VITA32信号，RESETOUT#J1端口0除外。串行端口1 Mini DB-9控制台串行端口P1 VME五行P1 P2 VME五列P2，分配给E1-1至E1-4 TSEC4信号的RTM TSEC3信号分配给E2-1至E2-4串行端口2-5 J2 USB单通道直立USB连接器。前置P4处理器COP头P5边界扫描头XMC扩展连接器（J6）上的USB1一个76针麦克风连接器，带有一排接地引脚，用于提供XMC扩展能力。此连接器的引脚分配如下。以太网连接器（J4A/J4B）有四个10/100/1000Mb/s全双工以太网接口，使用MC8641D三速以太网控制器（TSEC）。两个千兆以太网接口连接到两个带有集成LED的前面板RJ-45连接器，用于速度和活动指示。其他千兆以太网接口路由到P2，用于后端I/O
J6 XMC Expansion 8X PCI-E to XMCSpan J4A TSEC 1, 10/100/1000 Ethernet RJ-45 J4B TSEC 2, 10/100/1000 Ethernet RJ-45 J11, J12, J13, J14 J21, J22, J23 PMC1 PMC2 Implementing all recommended and optional VITA32 signals except RESETOUT# J1 Port 0. Serial Port 1 Mini DB-9 console serial port P1 VME five-row P1 P2 VME five-row P2 on SBC and RTM TSEC3 signals assigned to E1-1 thru E1-4 TSEC4 signals assigned to E2-1 thru E2-4 Serial ports 2-5 J2 USB Single channel upright USB connector. USB1 on front P4 Processor COP header P5 Boundary Scan header XMC Expansion Connector (J6) One 76-pin Mictor connector with a center row of ground pins is used to provide XMC expansion capability. The pin assignments for this connector are as follows.Ethernet Connectors (J4A/J4B) There are four 10/100/1000Mb/s full duplex Ethernet interfaces using the MC8641D Triple Speed Ethernet Controllers (TSECs). Two Gigabit Ethernet interfaces are routed to the two front-panel RJ-45 connectors with integrated LEDs for speed and activity indication. The other Gigabit Ethernet interfaces are routed to P2 for rear I/O
