GE DS200TCPSG1AME输出模块
地理地址开关，S2 Tsi148 VMEbus状态寄存器提供MVME7100的VMEbus地理地址。不使用5行背板的应用程序可以使用地理地址开关根据下图分配地理地址。有关GA地址开关分配的更多信息，请参见MVME7100单板计算机程序员参考VME系统控制器选择，S2的位置1和2用于选择VME系统控制选择。默认值用于自动确定SYSCON.1。VME SCON MAN开关关闭，选择Auto SCON（自动扫描）模式。开关打开，选择手动SCON模式，该模式与VME SCON SEL开关一起工作。2.VME SCON SEL开关关闭，选择非SCON模式。开关打开以选择始终SCON模式。此开关仅在VME SCON MAN开关打开时有效。如果要安装可选的MVME7216E转换模块，请参阅第40页的转换模块以了解配置开关设置。
Geographical Address Switch, S2 The Tsi148 VMEbus Status Register provides the VMEbus geographical address of the MVME7100. Applications not using the 5-row backplane can use the geographical address switch to assign a geographical address per the following diagram. More information regarding GA address switch assignments can be found in the MVME7100 Single Board Computer Programmer’s Reference VME System Controller Select, S2 Positions 1 and 2 of S2 are used to select VME System Controller selection. The default is for automatic determination of SYSCON.1. The VME SCON MAN switch is OFF to select Auto-SCON mode. The switch is ON to select manual SCON mode which works in conjunction with the VME SCON SEL switch. 2. The VME SCON SEL switch is OFF to select non-SCON mode. The switch is ON to select always SCON mode. This switch is only effective when the VME SCON MAN switch is ON.If you are installing the optional MVME7216E transition module, refer to Transition Module on page 40 for configuration switch settings.
