GE DS200IMCPG1BBA燃机卡件
DNP“DEVICE PROFILE DOCUMENT”纠正了8.1.3（表）更改模拟输入默认变量8.1.3（表格）更改二进制计数器默认变量8.1.4（表）对象20默认变量更改4.3.6（以前为p5-23）将脉冲输入2+3+4添加到脉冲输入总范围4.5.3（以前为ch 5）低频和过频电平分别从<或>更改为<=或>=。整个手册中都实施了这一更改。A、 1（以前为A1.1.1）添加到列表A.4中的缺失事件数据更新了跟踪存储器应用注释（更改A.1.4.）A.5校正了脉冲输出间隔A.8将脉冲输入值从A/B/C/D校正为1/2/3/4全局校正所有EnerVista PC程序名称参考EnerVista PQM设置表4-3将3相单位从kw校正为kvar表7-10存储器映射地址0481和048B更改为“保留”表7-10内存映射地址1147 O/V电平已更改表7-10地址1030和1032的内存映射出厂默认更正表7-10存储器映射地址0A94和0AAC的说明更改表7-100内存映射中的校正相位角单位（02E7-02EC）表7-10从内存映射中删除Vac THD max（04B0-04B3）的时间戳
DNP "DEVICE PROFILE DOCUMENT" corrected 8.1.3 (Table) Change Analog Input default Variation 8.1.3 (Table) Change Binary Counter Default Variation 8.1.3 (Table) Object 20 Default Variation changed 4.3.6(formerly p5-23) Added Pulse Input 2+3+4 to Pulse Input Total Range 4.5.3 (formerly ch 5) Underfrequency and overfrequency levels changed from < or > respectively, to <= or >= respectively. This change was implemented throughout entire manual. A.1 (formerly A1.1.1) Missing event data added to list A.4 Updated Trace Memory application note (change A.1.4.) A.5 Corrected Pulse Output Interval A.8 Corrected Pulse Input values from A/B/C/D to 1/2/3/4 Global Correction all EnerVista PC Program Name References to ENERVISTA PQM SETUP Table 4-3 Corrected 3 Phase unit from kw to kvar Table 7-10 Memory Map addresses 0481 and 048B changed to "Reserved" Table 7-10 Memory Map address 1147 O/V level changed Table 7-10 Memory map Factory Defaults corrections on addresses 1030 and 1032 Table 7-10 Memory map Description changes on addresses 0A94 and 0AAC Table 7-10 Corrected Phasor Angle units in memory map (02E7-02EC) Table 7-10 Remove time stamp for Vac THD max (04B0-04B3) from memory map
