GE DS200IMCPG1CCB控制主板卡件
A/B/C/N相电流需求继电器:增加了中性需求参考。4.5.7更新了脉冲输入继电器和4.5.9级的说明。串行通信故障报警延迟第4.5.3节中的正确继电器参考。增加了“0Hz时欠频”信息4.6.2纠正了“模拟启用”说明5.2.4图5.3.3时钟中插入的3相kVA MAX措辞更改了5.4.4纠正了3个事件记录的顺序。5.4.4电源关闭事件注释添加了5.4.1 K因子方程修正5.5.1更新了“软件版本”显示并添加了构建日期和时间5.5.1软件版本的更改第6.2.2节将GE Multilin网站地址更改为www.GEmultiline.com 6.4.4添加了“固件升级恢复”作为新的第6.4.4节添加了文本6.6.1谐波分析波形图形修正7.2.5-7.2.7修正从属Modbus功能第7.2.5节中#17的地址(措辞)存储单设定点示例7.3.4中的修正值在表中添加参考注释,以指示内存映射中的长整数部分
Phase A/B/C/N Current Demand Relay: Reference to Neutral Demand added. 4.5.7 Updated descriptions for Pulse Input Relay and Level 4.5.9 Correct relay reference in Serial Comm Fail Alarm Delay section 4.5.3 Added "Underfrequency when 0Hz" message 4.6.2 Corrected "Simulation Enabled For" descriptions 5.2.4 3 phase kVA MAX inserted in diagram 5.3.3 CLOCK wording changes 5.4.4 Corrected order of 3 Events Records. 5.4.4 Power-Off Event Note added 5.4.1 K-factor equation corrected 5.5.1 Updated "Software Version" display and added Build Date & Time 5.5.1 Changes to Software Versions section 6.2.2 Change GE Multilin website address to www.GEmultilin.com 6.4.4 Added "Firmware Upgrade Recovery" as a new section 6.4.4 Add text 6.6.1 Harmonic Analysis Waveform graphic corrected 7.2.5 - 7.2.7 Correct slave address (wording) to #17 in Modbus Functions sections 7.2.5 Corrected value in Store Single Setpoint example 7.3.4 Added Reference Note to table to indicate section on long integers in memory map