GE DS200IPCSG1ABB数字信号处理器控制板
更新了hipot测试图2.2.5辅助继电器措辞更改2.2.1从图2-8的文本中删除了“Delta”一词。替换为“Y型”。3.2.2报警措辞更改3.2.4措辞更改3.4.3按5顺序纠正第二条默认消息3.4.3按第5顺序纠正了第四条和第五条默认消息4.2.6通过modbus澄清设置日期/时间。在节的最后一段添加了文本。4.2.7将电价成本基础从MWh更改为kWh 4.2.6重新起草了时钟保持的一小时规范4.2.7修正了电力需求时间间隔范围4.2.7修正电力需求类型说明4.2.11（TIPS）修正了可编程消息位置为A2 4.3.2修正了模拟输出4串行值寄存器4.3.3修正了模拟输入主/备用电平和模拟输入主/Alt延迟的说明第4.5.1节将文本添加到过/欠电流/电压水平，作为百分比4.5.9时钟未设置警报措辞更改4.5.9数据日志1和2内存满电平范围更改为百分比4.5.5更新功率因数丢失定时的规格
Updated hipot testing drawing 2.2.5 Auxiliary Relays wording change 2.2.1 Word "Delta" deleted from the text above diagram 2-8. Replaced by "Wye." 3.2.2 ALARM wording change 3.2.4 Wording changes 3.4.3 Corrected second Default Message in sequence of 5 3.4.3 Corrected 4th and 5th Default Messages in sequence of 5 4.2.6 Clarify setting date/time through modbus. Added text to last paragraph in section. 4.2.7 Changed tariff cost basis from MWh to kWh 4.2.6 Re-worded one hour spec for clock retention 4.2.7 Corrected power demand time interval range 4.2.7 Correction to Power Demand Type description 4.2.11 (TIPS) Corrected Programmable Message location to A2 4.3.2 Changed Analog Output4 Serial Value Register 4.3.3 Correct descriptions for Analog in Main/Alt Level and Analog In Main/Alt Delay sections 4.5.1 Add text to over/under current/voltage levels as percentages 4.5.9 CLOCK NOT SET ALARM wording change 4.5.9 Data Logs 1 and 2 Memory Full Level ranges changed to percentages 4.5.5 Update specs for Power Factor dropout timing
