GE DS200TBQBG1ACB模拟I/o端子板
选择File（文件）>Send Info to Meter（发送信息至仪表）菜单项，将设定点文件加载到PQM中。Z A对话框将出现，以确认下载设定点的请求。Z单击Yes（是）立即将设定值发送至PQM，或单击No（否）中止该过程。Z EnerVista PQM设置程序现在将设定点文件加载到PQM中。如果在升级软件中添加了新的设置点，则将其设置为出厂默认值。输入设置点系统设置页面将用作示例，以说明设置点的输入。Z选择设定点>系统设置菜单项。将出现以下窗口：当选择非数字设置点（如CT接线）时，EnerVista PQM设置程序将显示一个下拉菜单：当选择数字设置点，如标称输入直接电压时，EnerVista PQM设置显示一个小键盘，允许用户输入小键盘顶部附近显示的设定值范围内的值：Z单击“接受”退出小键盘并保留新值。Z单击“取消”退出键盘并保留旧值。Z单击“存储”将值保存到PQM中。
Select the File > Send Info to Meter menu item to load the setpoint file into the PQM. Z A dialog box will appear to confirm the request to download setpoints. Z Click Yes to send the setpoints to the PQM now or No to abort the process. Z EnerVista PQM Setup now loads the setpoint file into the PQM. If new setpoints were added in the upgrade software, they will be set to factory defaults.Entering Setpoints The System Setup page will be used as an example to illustrate the entering of setpoints. Z Select the Setpoint > System Setup menu item. The following window will appear: When a non-numeric setpoint such as CT WIRING is selected, EnerVista PQM Setup displays a drop-down menu:When a numeric setpoint such as NOMINAL INPUT DIRECT VOLTAGE is selected, EnerVista PQM Setup displays a keypad that allows the user to enter a value within the setpoint range displayed near the top of the keypad:Z Click Accept to exit from the keypad and keep the new value. Z Click on Cancel to exit from the keypad and retain the old value. Z Click on Store to save the values into the PQM.
