GE DS200TCCAG1A模拟输入/输出板
找到要加载到PQM中的文件。固件文件名的格式如下：Z选择所需文件。Z单击“确定”继续，或单击“取消”中止固件升级。65 C 366 C4。000修改编号（000=无）对于GE Power Management，仅使用产品固件版本（例如350=3.50）。此编号必须大于PQ M的当前编号。此编号可在软件版本\主程序版本下的实际值页面A4中找到。所需的产品硬件版本。此字母必须与PQM产品标签（装置背面）上的序列号的第一个字符相匹配产品名称（65=PQM）将出现以下最后一个警告。这将是中止固件升级的最后机会。Z选择Yes（是）继续，选择No（否）加载其他文件，或选择Cancel（取消）中止进程。NerVista PQM安装程序现在准备PQM以接收新固件文件。PQM将显示一条消息，指示其处于UPLOAD MODE（上传模式）。当文件加载到PQM中时，会出现一个状态框，显示新固件文件的传输量和剩余量。整个传输过程大约需要五分钟。
Locate the file to load into the PQM. The firmware filename has the following format: Z Select the required file. Z Click on OK to proceed or Cancel to abort the firmware upgrade. 65 C 366 C4 . 000 Modification number (000 = none) For GE Power Management use only Product firmware revision (e.g. 350 = 3.50). This number must be larger than the current number of the PQ M. This number is found in actual values page A4 under SOFTWARE VERSIONS \ MAIN PROGRAM VERSION. Required product hardware revision. This letter must match the first character of the serial number located on the PQM product label (on the back of the unit) Product Name (65 = PQM) The final warning shown below will appear. This will be the last chance to abort the firmware upgrade. Z Select Yes to proceed, No to load a different file, or Cancel to abort the process.EnerVista PQM Setup now prepares the PQM to receive the new firmware file. The PQM will display a message indicating that it is in UPLOAD MODE. While the file is being loaded into the PQM, a status box appears showing how much of the new firmware file has been transferred and how much is remaining. The entire transfer process takes approximately five minutes.
