GE DS215DMCAG1AZZ02A控制板
测量这些最小值的时间和日期也显示在这些消息中。该信息存储在非易失性存储器中，并在失去控制电源时保留。相位A/B/C最小超前或滞后功率因数信息将仅针对WYE连接系统显示。设置点S1 PQM SETUP\CLEAR DATA\CLEAR MIN/MAX POWER VALUES用于清除这些值。三相A/B/C kW最大值：这些信息中显示了最大三相实际功率以及最大单相A/B/C实际功率。测量这些最大值的时间和日期也显示在这些消息中。该信息存储在非易失性存储器中，并在失去控制电源时保留。相位A/B/C最大实际功率信息将仅针对WYE连接系统显示。设置点S1 PQM SETUP\CLEAR DATA\CLEAR MIN/MAX POWER VALUES用于清除这些值。
The time and date at which these minimum values were measured is also displayed in these messages. This information is stored in non-volatile memory and will be retained during a loss of control power. The phase A/B/C minimum lead or lag power factor messages will be displayed only for a WYE connected system. The setpoint S1 PQM SETUP \ CLEAR DATA \ CLEAR MIN/MAX POWER VALUES is used to clear these values. THREE PHASE/A/B/C kW MAXIMUM: The maximum three phase real power as well as the maximum individual phase A/B/C real power is displayed in these messages. The time and date at which these maximum values were measured is also displayed in these messages. This information is stored in non-volatile memory and will be retained during a loss of control power. The phase A/B/C maximum real power messages will be displayed only for a WYE connected system. The setpoint S1 PQM SETUP \ CLEAR DATA \ CLEAR MIN/ MAX POWER VALUES is used to clear these values.
