GE DS3800HSCG1D1E燃机卡件
•功率因数滞后1/2下降：当滞后功率因数下降到该设定点设置的水平以下时，功率因数滞后/2条件将下降。•功率因数滞后1/2延迟：如果功率因数等于或超过功率因数滞后1/2PICKUP（功率因数滞后）设定值，并且在该设定值中编程的时间延迟内保持这种状态，则会出现功率因数滞后/2情况。如果功率因数降至功率因数滞后1/2下降设定值以下，则功率因数1/2滞后条件将下降。如果功率因数滞后1/2继电器设置点设置为报警，报警继电器将停用，功率因数滞后1/2ALARM消息将被清除。如果功率因数滞后1/2继电器设定值设置为AUX1、AUX2。相应的辅助继电器将停用。
• POWER FACTOR LAG 1 / 2 DROPOUT: When a lagging power factor drops below the level set by this setpoint, the power factor lag 1/2 condition will drop out. • POWER FACTOR LAG 1 / 2 DELAY: If the power factor equals or exceeds the POWER FACTOR LAG 1/2 PICKUP setpoint value and remains this way for the time delay programmed in this setpoint, a power factor lag 1/2 condition will occur. If the power factor drops below the POWER FACTOR LAG 1/2 DROPOUT setpoint value, the power factor 1/2 lag condition will drop out. If the POWER FACTOR LAG 1/ 2 RELAY setpoint is set to ALARM, the alarm relay will deactivate and the POWER FACTOR LAG 1/2 ALARM message will be cleared. If the POWER FACTOR LAG 1/2 RELAY setpoint is set to AUX1, AUX2. or AUX3, the respective auxiliary relay will deactivate.
