ABB DSAI 110 57120001-DP模拟输入模块
•PULSE INPUT 4 VALUE（脉冲输入4值）：在此设置点中输入一个值，该值相当于分配给PULSE Input4的开关输入上的1个脉冲输入（即1个脉冲=100 kWh）。累计值以实际值显示在A1 METERING\PULSE INPUT COUNTERS\PULSE Input4下。•脉冲输入总计：此设置点允许用户定义要将哪些脉冲输入相加。例如，如果选择该设定点为1+2+3，A1 METERING\PULSE COUNTERS\PULSE INPUT 1/2/3/4中显示的PULSE INPUT 2和PULSE INPUT 3值将相加，并显示在A1:METERING\PPULSE INPUT COUNTERS/PULSE in 1+2+3中。停止数据日志1/2:数据记录器操作只能通过串行端口使用EnerVista PQM设置或其他第三方软件进行配置。
• PULSE INPUT 4 VALUE: Enter a value in this setpoint that will be equivalent to 1 pulse input on the switch input assigned to PULSE INPUT 4 (i.e. 1 pulse = 100 kWh). The accumulated value is displayed in actual values under A1 METERING\PULSE INPUT COUNTERS\PULSE INPUT 4. • PULSE INPUT TOTAL: This setpoint allows the user to define which pulse inputs are to be added together. For example, if the selection is this setpoint is 1+2+3, the PULSE INPUT 1, PULSE INPUT 2 and PULSE INPUT 3 values shown in A1 METERING \ PULSE COUNTERS \ PULSE INPUT 1/2/3/4 will be added together and displayed in A1:METERING \ PULSE INPUT COUNTERS \ PULSE IN 1+2+3.STOP DATA LOG 1 / 2: The data logger operation is only configurable over the serial port using EnerVista PQM Setup or other third party software.
转载请附上此链接：http://www.jiangxidcs.com/
