FOXBORO FBM207c P0917GY I/O模块
使用/键显示要从默认消息队列中删除的设置点或实际值消息，并执行以下步骤。默认消息亮度设置点仅适用于具有较旧硬件版本的PQM，包括三相实际功率=1000 kW以删除此消息。按下存储键和重置键时，从显示3秒的默认消息队列中删除实际值或设置点当按顺序按下存储键和重置键时，显示3秒的REDEFMSG.VSD NOT A SELECTED DEFAULT MESSAGE（重置）信息。每个PQM预先编程有五条默认信息，如下所示。注意，每次重新加载出厂设置点时，用户编程的默认信息都会被这些信息覆盖。PQM将按所示顺序滚动浏览默认消息。
Use the / keys to display the setpoint or actual value message to be deleted from the default message queue and follow the steps below. The DEFAULT MESSAGE BRIGHTNESS setpoint is only applicable for PQMs with older hardware revisions that includ THREE PHASE REAL POWER = 1000 kW TO DELETE THIS MESSAGE PRESS STORE DEFAULT MESSAGE REMOVED ACTUAL VALUE OR SETPOINT TO BE REMOVED FROM THE DEFAULT MESSAGE QUEUE DISPLAYED FOR 3 SECONDS WHEN STORE KEY AND RESET KEY ARE PRESSED IN SEQUENCE DISPLAYED FOR 3 SECONDS WHEN STORE KEY PRESSED REDEFMSG.VSD NOT A SELECTED DEFAULT MESSAGE DISPLAYED FOR 3 SECONDS WHEN STORE KEY AND RESET KEY ARE PRESSED IN SEQUENCE Each PQM is pre-programmed with five default messages as shown below. Note, each time the factory setpoints are reloaded the user programmed default messages are overwritten with these messages. The PQM will scroll through the default messages in the sequence shown.
转载请附上此链接：http://www.jiangxidcs.com/
