FOXBORO FBM218 P0922VW冗余输出模块
要在分组中选择信息，请按。要退出子组，请按访问上一条消息或转到下一个子组。SETPOINT message message]]SETPOINTS]]S2系统设置设置点MODBUS通信地址：1 COM1波特率：9600 BAUD message MISSAGE COM 1 PARITY：无消息▲ 消息▼ 消息▲ 消息▼ M E S S A G E在子组内向前移动子组内向后移动到下一个子组移动到上一个子组消息消息消息。VSD注意：亮度设定值仅对包含真空荧光显示器（VFD）的旧硬件版本的PQM有影响，默认信息时间1.0分钟默认信息亮度：使用和键输入60%值键设定值。当显示要求是/否响应的设置点时，每次按下或时，“是”变为“否”，或“否”变为为“是”
To select messages within a subgroup press . To back out of the subgroup, press to access the previous message or to go to the next subgroup.SETPOINT MESSAGE MESSAGE ]] SETPOINTS ]] S2 SYSTEM SETUP SETPOINT MODBUS COMMUNICATION ADDRESS: 1 COM1 BAUD RATE: 9600 BAUD MESSAGE MESSAGE COM 1 PARITY: NONE MESSAGE ▲ MESSAGE ▼ MESSAGE ▲ MESSAGE ▼ M E S S A G E MOVES FORWARD WITHIN SUBGROUP MOVES BACK WITHIN SUBGROUP MOVES TO NEXT SUBGROUP MOVES TO PREVIOUS SUBGROUP MESSAGE MSGKEYOP.VSD NOTE: The brightness setpoint only has an effect on PQMs with older hardware revisions that include a vacuum flourescent display (VFD), not a liquid crystal display (LCD).DEFAULT MESSAGE TIME 1.0 MINUTES DEFAULT MESSAGE BRIGHTNESS: 60% Value Keys Setpoint values are entered using the and keys. When a setpoint is displayed calling for a yes/no response, each time or is pressed, the "Yes" becomes a "No," or the "No" becomes a "Yes."
转载请附上此链接：http://www.jiangxidcs.com/
