GE Multilin UR6PH自动化控制模块
物理2.1.1 PQM的安装物理尺寸和所需切口尺寸如下所示。在面板上开好切口和安装孔后，使用提供的八个#6自攻螺钉固定PQM。将装置安装在面板或开关柜门上，以允许操作员访问键盘和指示器产品标识产品属性根据客户订单上选择的配置和选项而变化。在给PQM通电之前，检查背面的标签，确保安装了正确的选项。型号：显示PQM配置。基本面板安装PQM的型号为“PQM”。基本底盘安装PQM的型号为“PQM\ND”。仅当安装了传感器、控制或功率分析选项时，T20、C和A才会出现在型号中。2.电源电压：表示PQM中安装的电源输入配置。本示例中所示的PQM可以接受70至265V AC的任何AC 50/60Hz电压或90至300V DC的DC电压。Physical 2.1.1 Mounting Physical dimensions and required cutout dimensions for the PQM are shown below. Once the cutout and mounting holes are made in the panel, use the eight #6 self-tapping screws provided to secure the PQM. Mount the unit on a panel or switchgear door to allow operator access to the keypad and indicators Product Identification Product attributes vary according to the configuration and options selected on the customer order. Before applying power to the PQM, examine the label on the back and ensure the correct options are installed.1. MODEL NO: Shows the PQM configuration. The model number for a basic panel mount PQM is “PQM”. The model number for a basic chassis mount PQM is “PQM\ND”. T20, C, and A appear in the model number only if the Transducer, Control, or Power Analysis options are installed. 2. SUPPLY VOLTAGE: Indicates the power supply input configuration installed in the PQM. The PQM shown in this example can accept any AC 50/60Hz voltage from 70 to 265 V AC or DC voltage from 90 to 300 V DC.
转载请附上此链接：http://www.jiangxidcs.com/
