HIEE300910R0001工控备件模块
支持的协议o每个模块一个以太网MAC地址和一个IP地址o与SNTP时间服务器的时间同步o嵌入式以太网重启按钮，手动重启以太网固件，而无需重启模块。·用于网络监控的专用RS-232 Station Manager端口·LED行为与ETM001相同·通过单个COMMREQ命令进行DNP3配置o支持多达12072个点和20000个事件的数据交换o支持八个DNP3对象：DI、DI w/time、DO、DO w/time、CROB、模拟输出值、时间设置、，和类轮询o多个RX3i内存类型可用于DNP3数据交换o二进制DI/DO o模拟（32位有符号、16位有符号或单精度浮点）o支持与DNP3 Master的主动数据通信·与任何机架安装的RX3i CPU兼容，包括冗余控制器o每个RX3i最多4个EDS001，如可用电源和插槽所允许，图400：EDS001功能概览PACSystems*RX3i系统手册第16节GFK-2314T 2019年9月专用模块758 o模块可安装在任何可用的RX3i主机架I/o插槽o模块支持插入和从通电的RX3i背板中取出。o模块支持使用WinLoader软件实用程序（如果主机CPU有串行端口）或使用基于Web的工具（如果主机没有串行端口）进行固件升级。固件升级套件中包含说明。23有关此模块的更多信息，请参阅PACSystems RX3i DNP3 Outstation module IC695EDS001用户手册，GFK-2911。PACSystems*RX3i系统手册第16节GFK-2314T 2019年9月专用模块759 16.14 RX3i IEC 104服务器模块：IC695EIS001 PACSystems*RX3i系统说明书第16节GFK-2314T2019年9月份专用模块760 PACSystems RX3i以太网IEC 104服务器模件，目录号IC695EISO01，实施IEC 60870-5-104通信协议。它允许PACSystems RX3i控制器使用标准TCP/IP连接方案连接到以太网，允许IEC 104客户端从服务器轮询数据，以及从服务器向客户端生成未经请求的通信。两个自动感应10BaseT/100BaseTX RJ-45屏蔽双绞线以太网端口允许直接连接到10BaseT或100BaseTX IEEE 802.3网络，无需外部收发器。支持直线、星形和菊花链拓扑。RX3i以太网IEC 104服务器模块在通用RX3i ETM001模块硬件平台上托管IEC104服务器端协议。因此，许多规范和行为与ETM001模块共享，包括协议支持。IC695EIS001是一个以太网连接模块，安装在RX3i背板中，并允许RX3i在IEC104网络上充当服务器。EIS001模块和IEC104客户端之间的数据交换是可配置的，使用梯形逻辑或结构化文本程序中的单个COMMREQ指令。16.14.1模块特征▪ 支持与配置中指定的RX3i控制器数据集的一个连接。▪ 支持单点和双点数据的询问和RBE。▪ 支持询问和RBE用于规定步骤。▪ 支持缩放、标准化和单精度浮点的查询和测量数据集。▪ 支持56位IEC 60870-5-104时间格式，
protocols supported o One Ethernet MAC Address and one IP Address per module o Time synchronization to SNTP Time Server o Recessed Ethernet Restarts pushbutton to manually restart the Ethernet firmware without power-cycling the module. · Dedicated RS-232 Station Manager Port for network supervision · LED behavior same as ETM001 · DNP3 configuration via a single COMMREQ command o Data exchanges up to 12,072 points and 20,000 events supported o Eight DNP3 Objects supported: DI, DI w/time, DO, DO w/time, CROB, analog output values, time setting, and class polls o Multiple RX3i memory types may be utilized for DNP3 data exchange o Binary DI/DO o Analog (32-bit signed, 16-bit signed, or single-precision floating-point) o Supports unsolicited data communications with DNP3 Master · Compatible with any rack-mounted RX3i CPU, including redundant controllers o Up to 4 EDS001 per RX3i, as allowed by available power and slots Figure 400: EDS001 Features at a Glance PACSystems* RX3i System Manual Section 16 GFK-2314T Sept. 2019 Special Purpose Modules 758 o Module can be installed in any available RX3i main rack I/O slot o Module supports insertion into and removal from an RX3i backplane which is under power. o Module supports firmware upgrades using the WinLoader software utility (if the host CPU has a serial port) or using a Web-based tool (if the host CPU has no serial port). Instructions are included with the firmware upgrade kit.23 For more information about this module, please refer to PACSystems RX3i DNP3 Outstation Module IC695EDS001 User’s Manual, GFK-2911. PACSystems* RX3i System Manual Section 16 GFK-2314T Sept. 2019 Special Purpose Modules 759 16.14 RX3i IEC 104 Server Module: IC695EIS001 PACSystems* RX3i System Manual Section 16 GFK-2314T Sept. 2019 Special Purpose Modules 760 The PACSystems RX3i Ethernet IEC 104 Server Module, catalog number IC695EIS001, implements the IEC 60870-5-104 communications protocol. It permits a PACSystems RX3i controller to be connected to an Ethernet network using a standard TCP/IP connection scheme, allowing an IEC 104 Client to poll data from the Server, as well generate unsolicited communications from the Server back to the Client. Two auto-sensing 10BaseT/100BaseTX RJ-45 shielded twisted-pair Ethernet ports permit direct connection to either a 10BaseT or 100BaseTX IEEE 802.3 network without an external transceiver. Line, Star and Daisy Chain topologies are supported. The RX3i Ethernet IEC 104 Server Module hosts the IEC104 Server side protocol on a common RX3i ETM001 module hardware platform. Thus, many of the specifications and behaviors are shared with the ETM001 module including protocol support. IC695EIS001 is an Ethernet-connected module that fits in the RX3i backplane and permits the RX3i to behave as a Server on the IEC104 network. The data exchanges between the EIS001 module and IEC104 Client(s) are configurable, using a single COMMREQ instruction in the ladder logic or Structured Text program. 16.14.1 Module Features ▪ Supports one connection to the RX3i Controller data set specified in the configuration. ▪ Supports Interrogation and RBE for Single Point and Double Point data. ▪ Supports Interrogation and RBE for Regulated Step. ▪ Supports Interrogation and Measured data sets for Scaled, normalized, and single precision Float. ▪ Supports 56-bit IEC 60870-5-104 time format,
