IS200BPIIH1A控制器模块
EnerVista套件是一套业界领先的软件程序，可简化469继电器的各个方面。可以使用工具监控电机状态、维护继电器，并将469测量的信息集成到HMI或SCADA监控系统中。还提供了使用每个继电器附带的469设置软件附带的强大波形和事件序列查看器分析故障和系统干扰原因的实用程序。观点维护观点维护提供的工具将提高469的安全性，创建继电器运行状态报告，并简化受保护发电机故障排除步骤。视点维护中可用的工具包括：•设置审计跟踪报告•设备运行状况报告•全面故障诊断视点监控视点监控是一种功能强大但易于使用的小型系统监控和数据记录工具。视点监控提供了一个完整的HMI包，具有以下功能：•即插即用设备监控•单线监控•报警器报警•趋势报告•自动事件检索•自动波形检索EnerVista Integrator EnerVista集成器是一个工具包，可将多线设备无缝集成到新的或现有的设备中自动化系统。EnerVista Integrator包括：•OPC/DDE服务器•多行驱动程序•自动事件检索•自动波形检索469电机保护系统GEGridSolutions.com 7使用电机设置自动配置程序，通过6个简单步骤为469创建完整的设置文件。在几分钟内改装现有多线SR 469设备传统上，改装或升级现有继电器是一项具有挑战性且耗时的任务，通常需要重新设计、面板修改和重新布线。Multilin 8系列改装套件提供了一个快速的三步解决方案，用于升级先前安装的Multilin SR 469保护继电器，从而降低升级成本。使用新的8系列改装套件，用户可以安装新的869电机保护系统，而无需修改现有面板或开关设备的开孔、重新布线，也无需更改图纸和重新设计时间和成本。通过这一三步流程，操作员可以在21分钟内升级现有SR继电器，简化维护程序并减少系统停机时间。8系列改装套件在工厂组装并测试为带有8系列保护装置的完整装置，如果现有硬件严重老化或损坏，则包括更换硬件（接线板和螺钉）。详细了解在线访问我们，使用我们的互动应用程序详细了解SR至8系列改装套件。www.GEGridSolutions.com/8SeriesModificationKit EnerVista 8系列安装软件提供自动设置文件转换和图形报告，以快速轻松地验证设置并识别可能需要注意的任何特定设置。只需拆下上、下和低压接线板，然后从面板上拆下SR机箱。无需断开任何现场接线。
EnerVista Suite is an industry leading set of software programs that will simplify every aspect of using the 469 relay. Tools to monitor the status of your motor, maintain your relay, and integrate information measured by the 469 into HMI or SCADA monitoring systems are available. Also provided are the utilities to analyze the cause of faults and system disturbances using the powerful Waveform and Sequence of Event viewers that come with the 469 Setup Software that is included with each relay. Viewpoint Maintenance Viewpoint Maintenance provides tools that will increase the security of your 469, create reports on the operating status of the relay, and simplify the steps to troubleshoot protected generators. Tools available in Viewpoint Maintenance include: • Settings Audit Trail Report • Device Health Report • Comprehensive Fault Diagnostics Viewpoint Monitoring Viewpoint Monitoring is a powerful yet simpleto-use monitoring and data recording of small systems. Viewpoint Monitoring provides a complete HMI package with the following functionality: • Plug-&-Play Device Monitoring • Single-Line Monitoring & Control • Annunciator Alarming • Trending Reports • Automatic Event Retrieval • Automatic Waveform Retrieval EnerVista Integrator EnerVista Integrator is a toolkit that allows seamless integration of Multilin devices into new or existing automation systems. Included in EnerVista Integrator is: • OPC/DDE Server • Multilin Drivers • Automatic Event Retrieval • Automatic Waveform Retrieval 469 Motor Protection System GEGridSolutions.com 7 Create complete settings files for your 469 in 6 simple steps using the Motor Settings Auto-Configurator. Retrofit Existing Multilin SR 469 Devices in Minutes Traditionally, retrofitting or upgrading an existing relay has been a challenging and time consuming task often requiring re-engineering, panel modifications, and re-wiring. The Multilin 8 Series Retrofit Kit provides a quick, 3-step solution to upgrade previously installed Multilin SR 469 protection relays, reducing upgrade costs. With the new 8 Series Retrofit Kit, users are able to install a new 869 Motor Protection System without modifying existing panel or switchgear cutouts, re-wiring, or need for drawing changes and re-engineering time and cost. With this three-step process, operators are able to upgrade existing SR relays in as fast as 21 minutes, simplifying maintenance procedures and reducing system downtime. The 8 Series Retrofit Kit comes factory assembled and tested as a complete unit with the 8 Series protection device and includes replacement hardware (terminal blocks and screws) if the existing hardware is significantly aged or damaged. Explore in Detail Visit us online to explore the SR to 8 Series retrofit kit in detail using our interactive app. www.GEGridSolutions.com/8SeriesRetrofitKit EnerVista 8 Series Setup Software provides automated setting file conversion with graphical report to quickly and easily verify settings and identify any specific settings that may need attention. Simply remove the upper, lower and low voltage terminal blocks and then remove the SR chassis from the panel. No need to disconnect any of the field wiring.
