IS200DAMAG1BCB DCS工控模块备件
值设置描述隐身模式默认情况下未选中选中启用框以激活隐身模式功能SPI默认情况下选中启用框激活SPI功能放弃WAN Ping默认情况下不选中选中启用复选框以激活放弃WAN Ping功能定义远程管理员主机路由器允许网络管理员管理远程路由器。网络管理员可以分配特定的IP地址和服务端口以允许访问路由器。EW200工业蜂窝网关275远程管理员主机定义项值设置描述协议默认设置HTTP为路由器访问选择HTTP或HTTPS方法。IP必需设置此字段用于指定远程主机以分配远程访问的访问权限。选择任意IP以允许任何远程主机选择特定IP以允许来自特定子网的远程主机。在此字段中输入的IP地址和组成子网的选定子网掩码。服务端口1。默认情况下，HTTP为80。443默认为HTTPS此字段用于指定服务端口到HTTP或HTTPS连接。值范围：1~65535。启用规则默认情况下未选中单击“启用”框以激活此规则。保存单击启用框激活此规则，然后保存设置。撤消单击撤消以取消设置EW200工业蜂窝网关276第6章管理6.1控制和管理控制和管理指的是分布式系统的企业范围管理，包括（通常在实践中）计算机系统。集中管理需要时间和精力的权衡，这与公司的规模、IT员工的专业知识以及使用的技术数量有关。此设备支持许多系统管理协议，如命令脚本、TR-069、SNMP和Telnet with CLI。您可以在“控制和管理”部分设置这些配置。EW200工业蜂窝网关277 6.1.1命令脚本命令脚本配置是一种应用程序，允许管理员以纯文本样式设置预定义的配置，并在启动时应用配置。转到“管理”>“命令脚本”>“配置”选项卡。启用命令脚本配置项值设置描述命令脚本默认情况下未选中选中“启用”框以激活命令脚本功能。备份脚本单击“通过Web UI”或“通过存储”按钮备份.txt文件中的现有命令脚本。您可以在下面的脚本名称中指定脚本文件名。上载脚本单击“通过Web UI”或“通过存储”按钮，从指定的.txt文件上载现有命令脚本。脚本名称1。可选设置2。任何有效的文件名为脚本备份指定脚本文件名，或显示选定的上载脚本文件名。值范围：0~32个字符。
Value setting Description Stealth Mode Unchecked by default Check the Enable box to activate the Stealth Mode function SPI Checked by default Check the Enable box to activate the SPI function Discard Ping from WAN Unchecked by default Check the Enable box to activate the Discard Ping from WAN function Define Remote Administrator Host The router allows the network administrator to manage the router remotely. The network administrator can assign specific IP address and service ports to allow access to the router. EW200 Industrial Cellular Gateway 275 Remote Administrator Host Definition Item Value setting Description Protocol HTTP is set by default Select HTTP or HTTPS method for router access. IP Required setting This field is to specify the remote host to assign access rights for remote access. Select Any IP to allow any remote hosts Select Specific IP to allow the remote host coming from a specific subnet. An IP address entered in this field and a selected Subnet Mask to compose the subnet. Service Port 1. 80 for HTTP by default 2. 443 for HTTPS by default This field is to specify a Service Port to HTTP or HTTPS connection. Value Range: 1 ~ 65535. Enabling the rule Unchecked by default Click Enable box to activate this rule. Save Click Enable box to activate this rule then save the settings. Undo Click Undo to cancel the settings EW200 Industrial Cellular Gateway 276 Chapter 6 Administration 6.1 Con & Manage Con & Manage refers to enterprise-wide administration of distributed systems including (and commonly in practice) computer systems. Centralized management has a time and effort trade-off that is related to the size of the company, the expertise of the IT staff, and the amount of techlogy being used. This device supports many system management protocols, such as Command Script, TR-069, SNMP, and Telnet with CLI. You can set up these configurations in the "Con & Manage" section. EW200 Industrial Cellular Gateway 277 6.1.1 Command Script Command script configuration is the application that allows administrator to set up a pre-defined configuration in plain text style and apply configuration on startup. Go to Administration > Command Script > Configuration Tab. Enable Command Script Configuration Configuration Item Value setting Description Command Script Unchecked by default Check the Enable box to activate the Command Script function. Backup Script Click the Via Web UI or Via Storage button to back up the existing command script in a .txt file. You can specify the script file name in Script Name below. Upload Script Click the Via Web UI or Via Storage button to Upload the existing command script from a specified .txt file. Script Name 1. Optional setting 2. Any valid file name Specify a script file name for script backup, or display the selected upload script file name. Value Range: 0 ~ 32 characters.
