IS200DAMCG1ABB控制器模块
通过“添加规则”快捷按钮访问以创建组。目标IP 1。所需设置2。默认情况下，选择“任意”。此字段用于指定目标IP地址。选择Any（任何）以过滤进入任何IP地址的数据包。选择“特定IP地址”以过滤输入到此字段中输入的IP地址的数据包。选择IP Range（IP范围）以过滤输入到此字段中输入的指定IP地址范围的数据包。选择基于IP地址的组以过滤进入所选预定义组的数据包。必须在该选择可用之前预定义组。请参阅对象定义>分组>主机分组。您还可以通过“添加规则”快捷按钮访问以创建组。通过添加规则按钮完成的设置也将显示在主机分组设置屏幕中。源MAC 1。所需设置2。默认情况下，选择“任意”。此字段用于指定源MAC地址。选择任意以过滤来自任何MAC地址的数据包。选择特定MAC地址以过滤来自MAC地址的数据包。选择基于MAC地址的组以过滤来自所选预定义组的数据包。必须在该选择可用之前预定义组。请参阅对象定义>分组>主机分组。您还可以通过“添加规则”快捷按钮访问以创建组。方案1。所需设置2。默认情况下，为协议选择任何（0），选择任何以过滤任何协议包为源端口，选择Well-kwn服务时选择预定义的端口下拉框，否则选择用户定义的服务并指定端口范围。EW200工业蜂窝网关260对于目标端口，在选择Wellkwn服务时选择预定义的端口下拉框，否则选择用户定义的服务并指定端口范围。值范围：源端口、目标端口的值范围为1~65535。对于协议，选择ICMPv4以过滤ICMPv4数据包对于协议，请选择TCP以过滤TCP数据包对于源端口，选择Well-kwn服务时选择预定义的端口下拉框，否则选择用户定义的服务并指定端口范围。对于目标端口，选择Wellkwn服务时，选择预定义的端口下拉框，否则选择用户定义的服务并指定端口范围。值范围：源端口、目标端口的值范围为1~65535。对于协议，选择UDP以过滤UDP数据包对于源端口，选择Well-kwn服务时选择预定义的端口下拉框，否则选择用户定义的服务并指定端口范围。对于目标端口，选择Wellkwn服务时，选择预定义的端口下拉框，否则选择用户定义的服务并指定端口范围。值范围：源端口、目标端口的值范围为1~65535。对于协议，选择GRE以过滤GRE数据包，选择ESP以过滤ESP数据包，对于协议选择SCTP以过滤SCTP数据包，然后选择User defined以过滤具有指定端口号的数据包。然后在协议编号框中输入罐编号。需要时间表设置将时间表应用于此规则，否则将其保留为“始终”。如果下拉列表为空，请确保“时间表”为空。
You may also access to create a group by the Add Rule shortcut button. Destination IP 1. Required setting 2. By default Any is selected This field is to specify the Destination IP address. Select Any to filter packets that are entering to any IP addresses. Select Specific IP Address to filter packets entering to an IP address entered in this field. Select IP Range to filter packets entering to a specified range of IP address entered in this field. Select IP Address-based Group to filter packets entering to a pre-defined group selected. group must be pre-defined before this selection become available. Refer to Object Definition > Grouping > Host grouping. You may also access to create a group by the Add Rule shortcut button. Setting done through the Add Rule button will also appear in the Host grouping setting screen. Source MAC 1. Required setting 2. By default Any is selected This field is to specify the Source MAC address. Select Any to filter packets coming from any MAC addresses. Select Specific MAC Address to filter packets coming from a MAC address. Select MAC Address-based Group to filter packets coming from a pre-defined group selected. group must be pre-defined before this selection become available. Refer to Object Definition > Grouping > Host grouping. You may also access to create a group by the Add Rule shortcut button. Protocol 1. Required setting 2. By default Any(0) is selected For Protocol, select Any to filter any protocol packets For Source Port, select a predefined port dropdown box when Well-kwn Service is selected, otherwise select User-defined Service and specify a port range. EW200 Industrial Cellular Gateway 260 For Destination Port, select a predefined port dropdown box when Wellkwn Service is selected, otherwise select User-defined Service and specify a port range. Value Range: 1 ~ 65535 for Source Port, Destination Port. For Protocol, select ICMPv4 to filter ICMPv4 packets For Protocol, select TCP to filter TCP packets For Source Port, select a predefined port dropdown box when Well-kwn Service is selected, otherwise select User-defined Service and specify a port range. For Destination Port, select a predefined port dropdown box when Wellkwn Service is selected, otherwise select User-defined Service and specify a port range. Value Range: 1 ~ 65535 for Source Port, Destination Port. For Protocol, select UDP to filter UDP packets For Source Port, select a predefined port dropdown box when Well-kwn Service is selected, otherwise select User-defined Service and specify a port range. For Destination Port, select a predefined port dropdown box when Wellkwn Service is selected, otherwise select User-defined Service and specify a port range. Value Range: 1 ~ 65535 for Source Port, Destination Port. For Protocol, select GRE to filter GRE packets For Protocol, select ESP to filter ESP packets For Protocol, select SCTP to filter SCTP packets For Protocol, select User-defined to filter packets with specified port number. Then enter a pot number in Protocol Number box. Time Schedule Required setting Apply Time Schedule to this rule, otherwise leave it as Always. If the dropdown list is empty ensure Time Schedule is pre-cond.
