IS200DAMEG1ABA工控模块备件
启用PPTP启用PPTP窗口项值设置描述PPTP默认未选中单击启用框以激活PPTP功能。客户端/服务器必需设置指定PPTP的角色。选择服务器或客户端角色。以下是PPTP服务器和客户端的配置窗口。保存单击保存按钮保存设置。作为PPTP服务器，网关最多支持10个PPTP用户帐户。选择Client/Server（客户端/服务器）字段中的Server（服务器）后，将显示PPTP服务器配置窗口。EW200工业蜂窝网关248 PPTP服务器配置窗口项值设置描述PPTP服务器默认未选中选中启用框以启用网关的PPTP服务器角色。接口1。所需设置2。默认情况下选择所有WAN。选择要在其上建立PPTP隧道的接口。它可以是任何可用的WAN接口。服务器虚拟IP 1。所需设置2。默认值为192.168.0.1指定PPTP服务器虚拟IP地址。虚拟IP地址将用作PPTP客户端的虚拟DHCP服务器。在建立PPTP隧道后，客户端将从中分配一个虚拟IP地址。IP池起始地址1。所需设置2。默认值为10这是PPTP服务器的虚拟IP DHCP服务器。用户可以为将从中分配PPTP客户端IP地址的子网指定第一个IP地址。值范围：1~254。IP池结束地址1。所需设置2。默认值为17这是PPTP服务器的虚拟IP DHCP服务器。用户可以为将从中分配PPTP客户端IP地址的子网指定最后一个IP地址。值范围：>=起始地址，<（起始地址+8）或254。认证协议1。所需设置2。默认情况下未选中为要验证PPTP客户端的PPTP服务器选择单个或多个验证协议。可用的身份验证协议为PAP/CHAP/MS-CHAP/MS-CHAP v2。MPPE加密1。所需设置2。默认情况下未选中指定是否支持MPPE协议。单击启用框以启用MPPE，并从下拉框中选择40位/56位/128位。启用MPPE加密后，身份验证协议PAP/CHA选项将不可用。保存单击保存按钮保存设置。撤消单击“撤消”按钮取消设置。PPTP服务器状态窗口项值设置描述PPTP服务器状况显示连接的PPTP客户端的用户名、远程IP、远程虚拟IP和远程呼叫ID。
Enable PPTP Enable PPTP Window Item Value setting Description PPTP Unchecked by default Click the Enable box to activate PPTP function. Client/Server Required setting Specify the role of PPTP. Select Server or Client role. Below are the configuration windows for PPTP Server and for Client. Save Click Save button to save the settings. As a PPTP Server The gateway supports up to a of 10 PPTP user accounts. When Server in the Client/Server field is selected, the PPTP server configuration window will appear. EW200 Industrial Cellular Gateway 248 PPTP Server Configuration Window Item Value setting Description PPTP Server Unchecked by default Check the Enable box to enable PPTP server role of the gateway. Interface 1. Required setting 2. All WANs is selected by defaut Select the interface on which PPTP tunnel is to be established. It can be any available WAN interface. Server Virtual IP 1. Required setting 2. Default is 192.168.0.1 Specify the PPTP server Virtual IP address. The virtual IP address will serve as the virtual DHCP server for the PPTP clients. Clients will be assigned a virtual IP address from it after the PPTP tunnel has been established. IP Pool Starting Address 1. Required setting 2. Default is 10 This is the PPTP server’s Virtual IP DHCP server. User can specify the first IP address for the subnet from which the PPTP client’s IP address will be assigned. Value Range: 1 ~ 254. IP Pool Ending Address 1. Required setting 2. Default is 17 This is the PPTP server’s Virtual IP DHCP server. User can specify the last IP address for the subnet from which the PPTP client’s IP address will be assigned. Value Range: >= Starting Address, and < (Starting Address + 8) or 254. Authentication Protocol 1. Required setting 2. Unchecked by default Select single or multiple Authentication Protocols for the PPTP server with which to authenticate PPTP clients. Available authentication protocols are PAP / CHAP / MS-CHAP / MS-CHAP v2. MPPE Encryption 1. Required setting 2. Unchecked by default Specify whether to support MPPE Protocol. Click the Enable box to enable MPPE and from dropdown box to select 40 bits / 56 bits / 128 bits. when MPPE Encryption is enabled, the Authentication Protocol PAP / CHAP options will t be available. Save Click Save button to save the settings. Undo Click Undo button to cancel the settings. PPTP Server Status Window Item Value setting Description PPTP Server Status Displays the User Name, Remote IP, Remote Virtual IP, and Remote Call ID of the connected PPTP clients.
