IS200DRLYH1BBB DCS工控模块备件
单击刷新按钮以更新L2TP客户端信息。EW200工业蜂窝网关242用户帐户列表窗口项值设置描述用户帐户列表最多10个用户帐户这是L2TP身份验证用户帐户条目。您可以为远程客户端创建和添加帐户，以建立到网关设备的L2TP VPN连接。单击“添加”按钮添加用户帐户。输入用户名和密码。然后选中启用框以启用用户。单击“保存”按钮保存新用户帐户。单击“删除”按钮可以永久删除选定的用户帐户。值范围：1~32个字符。作为L2TP客户端当在客户端/服务器中选择客户端时，将显示一系列L2TP客户端配置屏幕。L2TP客户端配置项设置值设置描述默认情况下未选中L2TP客户端选中启用框以启用网关的L2TP客户端角色。保存单击保存按钮保存设置。撤消单击“撤消”按钮取消设置。EW200工业蜂窝网关243创建/编辑L2TP客户端当应用添加/编辑按钮时，将出现一系列配置屏幕。最多可以添加8个L2TP客户端。L2TP客户端配置项设置值设置描述隧道名称必需设置输入隧道名称。值范围：1~32个字符。所需接口设置定义要用于此L2TP隧道的所选接口（WAN-1仅在启用WAN-1接口时可用）。这同样适用于其他WAN接口（例如WAN-2）。IPsec上的L2TP默认情况下未选中选中“启用”框以激活IPsec上的L2 TP，并进一步指定预共享密钥（8~32个字符）。远程LNS IP/FDN必需设置输入L2TP服务器的公共IP地址或FQDN。MTU 1。所需设置2。默认设置为1500指定MTU。值范围：0~1500。EW200工业蜂窝网关244远程LNS端口1。所需设置2。默认值为1701输入此L2TP隧道的远程LNS端口。值范围：1~65535。需要用户名设置输入连接到L2TP服务器时要验证的此L2TP隧道的用户名。值范围：1~32个字符。需要密码设置输入连接到L2TP服务器时要验证的L2TP隧道的密码。隧道密码（可选）默认情况下未选中输入此L2TP隧道的隧道密码以进行身份验证。需要远程子网设置指定此L2TP隧道到达L2TP服务器的远程子网。远程子网格式必须是IP地址/网络掩码（例如10.0.0.2/24）。它适用于L2TP VPN服务器的Intranet。因此，在L2TP客户端对等端，其目的地位于专用子网中的数据包将通过L2TP VPN隧道传输。其他将基于L2TP客户端对等端安全网关的当前路由策略进行传输。如果在“远程子网”字段中输入0.0.0.0/0，它将被视为L2TP客户端对等端的默认网关设置，
Click the Refresh button to renew the L2TP client information. EW200 Industrial Cellular Gateway 242 User Account List Window Item Value setting Description User Account List Max. of 10 user accounts This is the L2TP authentication user account entry. You can create and add accounts for remote clients to establish L2TP VPN connection to the gateway device. Click Add button to add a user account. Enter the User name and password. Then check the enable box to enable the user. Click Save button to save the new user account. The selected user account can permanently be deleted by clicking the Delete button. Value Range: 1 ~ 32 characters. As a L2TP Client When Client is selected in Client/Server, a series of L2TP Client Configuration screens will appear. L2TP Client Configuration Item Setting Value setting Description L2TP Client Unchecked by default Check the Enable box to enable L2TP client role of the gateway. Save Click Save button to save the settings. Undo Click Undo button to cancel the settings. EW200 Industrial Cellular Gateway 243 Create/Edit L2TP Client When the Add/Edit button is applied, a series of configuration screen will appear. You can add up to 8 L2TP Clients. L2TP Client Configuration Item Setting Value setting Description Tunnel Name Required setting Enter a tunnel name. Value Range: 1 ~ 32 characters. Interface Required setting Define the selected interface to be the used for this L2TP tunnel (WAN-1 is available only when WAN-1 interface is enabled) The same applies to other WAN interfaces (e.g. WAN-2). L2TP over IPsec Unchecked by default Check the Enable box to activate L2TP over IPsec, and further specify a Preshared Key (8~32 characters). Remote LNS IP/FQDN Required setting Enter the public IP address or the FQDN of the L2TP server. MTU 1. Required setting 2. 1500 is set by default Specify the MTU. Value Range: 0 ~ 1500. EW200 Industrial Cellular Gateway 244 Remote LNS Port 1. Required setting 2. Default is 1701 Enter the Remote LNS Port for this L2TP tunnel. Value Range: 1 ~ 65535. User Name Required setting Enter the User Name for this L2TP tunnel to be authenticated when connect to L2TP server. Value Range: 1 ~ 32 characters. Password Required setting Enter the Password for this L2TP tunnel to be authenticated when connect to L2TP server. Tunneling Password(Optional) Unchecked by default Enter the Tunneling Password for this L2TP tunnel to authenticate. Remote Subnet Required setting Specify the remote subnet for this L2TP tunnel to reach the L2TP server. The Remote Subnet format must be IP address/netmask (e.g. 10.0.0.2/24). It is for the Intranet of L2TP VPN server. So, at L2TP client peer, the packets whose destination is in the dedicated subnet will be transferred via the L2TP VPN tunnel. Others will be transferred based on current routing policy of the security gateway at L2TP client peer. If you enter 0.0.0.0/0 in the Remote Subnet field, it will be treated as a default gateway setting for the L2TP client peer, all packets, including the Internet accessing of L2TP Client peers,
