IS200DRLYH1BBB IS200DRLYH1工控模块机器人备件
T这些数据包通过L2TP隧道。EW200工业蜂窝网关240 L2TP设置转到安全>VPN>L2TP选项卡。L2TP设置允许用户创建和控制L2TP隧道。启用L2TP启用L2TP窗口项值设置描述默认情况下未选中L2TP单击启用框以激活L2TP功能。客户端/服务器必需设置指定L2TP的角色。为网关选择服务器或客户端角色。以下是L2TP服务器和客户端的配置窗口。保存单击保存按钮将设置保存为L2TP服务器当在客户机/服务器中选择服务器时，将显示L2TP服务器配置。EW200工业蜂窝网关241 L2TP服务器配置项值设置描述L2TP服务器默认未选中单击启用框激活L2TP服务器接口1。所需设置2。默认情况下选择所有WAN选择要在其上建立L2TP隧道的接口。它可以是任何可用的WAN接口。IPsec上的L2TP默认情况下未选中单击“启用”框以启用IPsec上的L2 TP，并填写预共享密钥（8~32个字符）。需要服务器虚拟IP设置指定L2TP服务器虚拟IP。IP池起始地址1。所需设置2。默认设置为10。指定虚拟IP池的L2TP服务器启动IP。值范围：1~254。IP池结束地址1。所需设置2。默认设置为17。指定虚拟IP池的L2TP服务器结束IP。值范围：>=起始地址，<（起始地址+8）或254。需要验证协议设置为L2TP服务器选择一个或多个验证协议，用于验证L2TP客户端。可用的身份验证协议为PAP/CHAP/MS-CHAP/MS-CHAP v2。需要MPPE加密设置指定是否支持MPPE协议。单击启用框以启用MPPE，并从下拉框中选择40位/56位/128位。启用MPPE加密后，身份验证协议PAP/CHA选项将不可用。需要服务端口设置指定L2TP服务器将使用的服务端口。值范围：1~65535。保存单击保存按钮保存配置。撤消单击“撤消”按钮以恢复配置。L2TP服务器状态项值设置描述L2TP服务器状况显示连接的L2TP客户端的用户名、远程IP、远程虚拟IP和远程呼叫ID。
hose packets come through the L2TP tunnel. EW200 Industrial Cellular Gateway 240 L2TP Setting Go to Security > VPN > L2TP tab. The L2TP setting allows user to create and con L2TP tunnels. Enable L2TP Enable L2TP Window Item Value setting Description L2TP Unchecked by default Click the Enable box to activate L2TP function. Client/Server Required setting Specify the role of L2TP. Select Server or Client role for the gateway to take. Below are the configuration windows for L2TP Server and for Client. Save Click Save button to save the settings As a L2TP Server When Server is selected in Client/Server, the L2TP server Configuration will appear. EW200 Industrial Cellular Gateway 241 L2TP Server Configuration Item Value setting Description L2TP Server Unchecked by default Click the Enable box to activate L2TP server Interface 1. Required setting 2. All WANs is selected by default Select the interface on which L2TP tunnel is to be established. It can be any available WAN interface. L2TP over IPsec Unchecked by default Click the Enable box to enable L2TP over IPsec, and fill in the Pre-shared Key (8~32 characters). Server Virtual IP Required setting Specify the L2TP server Virtual IP. IP Pool Starting Address 1. Required setting 2. 10 is set by default. Specify the L2TP server starting IP of virtual IP pool. Value Range: 1 ~ 254. IP Pool Ending Address 1. Required setting 2. 17 is set by default. Specify the L2TP server ending IP of virtual IP pool. Value Range: >= Starting Address, and < (Starting Address + 8) or 254. Authentication Protocol Required setting Select single or multiple Authentication Protocols for the L2TP server with which to authenticate L2TP clients. Available authentication protocols are PAP / CHAP / MS-CHAP / MS-CHAP v2. MPPE Encryption Required setting Specify whether to support MPPE Protocol. Click the Enable box to enable MPPE and from dropdown box to select 40 bits / 56 bits / 128 bits. when MPPE Encryption is enabled, the Authentication Protocol PAP / CHAP options will t be available. Service Port Required setting Specify the Service Port which L2TP server will use. Value Range: 1 ~ 65535. Save Click the Save button to save the configuration. Undo Click the Undo button to recover the configuration. L2TP Server Status Item Value setting Description L2TP Server Status Displays the User Name, Remote IP, Remote Virtual IP, and Remote Call ID of connected L2TP clients.
