IS200DSFCG1AEB机器人模块,电源模块
接口1。所需设置2。默认情况下，选择WAN-1。定义用于此OpenVPN客户端隧道的物理接口。方案1。所需设置2。默认情况下，选择TCP。定义OpenVPN客户端的协议。选择TCP->OpenVPN将使用TCP，端口将设置为443。选择UDP->OpenVPN将使用UDP，端口将设置为1194。端口1。所需设置2。默认设置443。指定OpenVPN客户端要使用的端口。值范围：1~65535。隧道方案1。所需设置2。默认情况下，TUN是指定OpenVPN客户端要使用的隧道方案类型。它可以是TUN隧道方案的TUN，或TAP隧道方案的TAP。已选择EW200工业蜂窝网关234。需要远程IP/FDN设置为此OpenVPN客户端隧道指定对等OpenVPN服务器的远程IP/FFQDN。输入IP地址或FQDN。需要远程子网设置为此OpenVPN客户端隧道指定对等OpenVPN服务器的远程子网。填写远程子网地址和远程子网掩码。重定向Internet流量1。可选设置。2.默认情况下未选中选中启用框以激活重定向Internet流量功能。NAT 1。可选设置。2.默认情况下未选中选中启用框以激活NAT功能。授权模式1。所需设置2。默认情况下，选择TLS。指定OpenVPN服务器的授权模式。TLS->OpenVPN将使用TLS授权模式，并将显示以下项目CA证书、客户端证书和客户端密钥。可以在受信任的CA证书列表中选择CA证书。请参阅对象定义>证书>受信任的证书。可以在本地证书列表中选择客户端证书。请参阅对象定义>证书>我的证书。可以在受信任的客户端密钥列表中选择客户端密钥。请参阅对象定义>证书>受信任的证书。静态密钥->OpenVPN将使用静态密钥授权模式，并将显示以下项目本地端点IP地址、远程端点IP地址和静态密钥。需要本地终结点IP地址设置指定此OpenVPN网关的虚拟本地终结点地址。值范围：IP格式为10.8.0.x，x的范围为1~254。只有在授权模式下选择静态密钥时，本地端点IP地址才可用。需要远程终结点IP地址设置指定对等OpenVPN网关的虚拟远程终结点地址。值范围：IP格式为10.8.0.x，x的范围为1~254。只有在授权模式下选择静态密钥时，远程端点IP地址才可用。需要静态密钥设置指定静态密钥。只有在授权模式下选择静态密钥时，静态密钥才可用。加密密码默认选中Blowfish。指定加密密码。
Interface 1. Required setting 2. By default WAN-1 is selected. Define the physical interface to be used for this OpenVPN Client tunnel. Protocol 1. Required setting 2. By default TCP is selected. Define the Protocol for the OpenVPN Client. Select TCP -> OpenVPN will use TCP, and Port will be set to 443. Select UDP -> OpenVPN will use UDP, and Port will be set to 1194. Port 1. Required setting 2. By default 443 is set. Specify the Port for the OpenVPN Client to use. Value Range: 1 ~ 65535. Tunnel Scenario 1. Required setting 2. By default TUN is Specify the type of Tunnel Scenario for the OpenVPN Client to use. It can be TUN for TUN tunnel scenario, or TAP for TAP tunnel scenario. EW200 Industrial Cellular Gateway 234 selected. Remote IP/FQDN Required setting Specify the Remote IP/FQDN of the peer OpenVPN Server for this OpenVPN Client tunnel. Enter the IP address or FQDN. Remote Subnet Required setting Specify Remote Subnet of the peer OpenVPN Server for this OpenVPN Client tunnel. Fill in the remote subnet address and remote subnet mask. Redirect Internet Traffic 1. Optional setting. 2. Unchecked by default Check the Enable box to activate the Redirect Internet Traffic function. NAT 1. Optional setting. 2. Unchecked by default Check the Enable box to activate the NAT function. Authorization Mode 1. Required setting 2. By default TLS is selected. Specify the authorization mode for the OpenVPN Server. TLS ->The OpenVPN will use TLS authorization mode, and the following items CA Cert., Client Cert. and Client Key will be displayed. CA Cert. can be selected in Trusted CA Certificate List. Refer to Object Definition > Certificate > Trusted Certificate. Client Cert. can be selected in Local Certificate List. Refer to Object Definition > Certificate > My Certificate. Client Key can be selected in Trusted Client key List. Refer to Object Definition > Certificate > Trusted Certificate. Static Key -> OpenVPN will use static key authorization mode, and the following items Local Endpoint IP Address, Remote Endpoint IP Address and Static Key will be displayed. Local Endpoint IP Address Required setting Specify the virtual Local Endpoint IP Address of this OpenVPN gateway. Value Range: The IP format is 10.8.0.x, the range of x is 1~254. Local Endpoint IP Address will be available only when Static Key is chosen in Authorization Mode. Remote Endpoint IP Address Required setting Specify the virtual Remote Endpoint IP Address of the peer OpenVPN gateway. Value Range: The IP format is 10.8.0.x, the range of x is 1~254. Remote Endpoint IP Address will be available only when Static Key is chosen in Authorization Mode. Static Key Required setting Specify the Static Key. Static Key will be available only when Static Key is chosen in Authorization Mode. Encryption Cipher By default Blowfish is selected. Specify the Encryption Cipher.
