IS200DSPCH1A DCS工控模块备件
S在授权模式下选择静态密钥。需要静态密钥设置指定静态密钥。只有在授权模式下选择静态密钥时，静态密钥才可用。需要服务器虚拟IP设置指定服务器虚拟IP。值范围：IP格式为10.y.0.0，y的范围为1~254。只有在授权模式下选择TLS时，服务器虚拟IP才可用。DHCP代理模式1。所需设置2。默认情况下，该框处于选中状态。选中启用框以激活DHCP代理模式。只有在隧道设备中选择TAP时，DHCP代理模式才可用。需要IP池设置指定OpenVPN服务器的虚拟IP池设置。指定起始地址和结束地址作为OpenVPN客户端的IP地址池。只有在隧道设备中选择TAP，并且DHCP代理模式未选中（禁用）时，IP池才可用。需要网关设置指定OpenVPN服务器的网关设置。它将分配给连接的OpenVPN客户端。只有在隧道设备中选择TAP，并且DHCP代理模式未选中（禁用）时，网关才可用。默认情况下，选择一个网络掩码。指定OpenVPN服务器的网络掩码设置。它将分配给连接的OpenVPN客户端。值范围：255.255.255.0/24（仅支持C类）te_1：当在隧道设备中选择TAP，并且DHCP代理模式未选中（禁用）时，网络掩码将可用。te_2：当隧道设备中选择TUN时，网络掩码也可用。重定向至“默认网关1”。可选设置。2.默认情况下未选中选中启用框以激活重定向默认网关功能。加密密码1。所需设置。2.默认情况下，已选择Blowfish。从下拉列表中指定加密密码。选择Blowfish/AES-256/AES-192/AES-128/ne。哈希算法默认选择SHA-1。从下拉列表中指定哈希算法。从SHA-1/MD5/MD4/SHA2-256/SHA2-512/ne/Disable中选择。LZO压缩默认情况下，“自适应”处于选中状态。指定LZO压缩方案。从自适应/是/默认中选择。Persis键1。可选设置。选中启用框以激活Persis Key功能。EW200工业蜂窝网关229 2。默认情况下，该框处于选中状态。Persis Tun 1。可选设置。2.默认选中该框。选中启用框以激活Persis Tun功能。高级配置单击编辑按钮为OpenVPN服务器指定高级配置设置。如果单击该按钮，下面将显示高级配置。保存单击保存保存设置。撤消单击“撤消”以取消更改。EW200工业蜂窝网关230选择高级配置后，将出现OpenVPN服务器高级配置屏幕。
tatic Key is chosen in Authorization Mode. Static Key Required setting Specify the Static Key. Static Key will be available only when Static Key is chosen in Authorization Mode. Server Virtual IP Required setting Specify the Server Virtual IP. Value Range: The IP format is 10.y.0.0, the range of y is 1~254. Server Virtual IP will be available only when TLS is chosen in Authorization Mode. DHCP-Proxy Mode 1. Required setting 2. The box is checked by default. Check the Enable box to activate the DHCP-Proxy Mode. DHCP-Proxy Mode will be available only when TAP is chosen in Tunnel Device. IP Pool Required setting Specify the virtual IP pool setting for the OpenVPN server. Specify the Starting Address and Ending Address as the IP address pool for the OpenVPN clients. IP Pool will be available only when TAP is chosen in Tunnel Device, and DHCP-Proxy Mode is unchecked (disabled). Gateway Required setting Specify the Gateway setting for the OpenVPN server. It will be assigned to the connected OpenVPN clients. Gateway will be available only when TAP is chosen in Tunnel Device, and DHCP-Proxy Mode is unchecked (disabled). Netmask By default - select one - is selected. Specify the Netmask setting for the OpenVPN server. It will be assigned to the connected OpenVPN clients. Value Range: 255.255.255.0/24 (only support class C) te_1: Netmask will be available when TAP is chosen in Tunnel Device, and DHCP-Proxy Mode is unchecked (disabled). te_2: Netmask will also be available when TUN is chosen in Tunnel Device. Redirect Default Gateway 1. Optional setting. 2. Unchecked by default Check the Enable box to activate the Redirect Default Gateway function. Encryption Cipher 1. Required setting. 2. By default Blowfish is selected. Specify the Encryption Cipher from the dropdown list. Select from Blowfish/AES-256/AES-192/AES-128/ne. Hash Algorithm By default SHA-1 is selected. Specify the Hash Algorithm from the dropdown list. Select from SHA-1/MD5/MD4/SHA2-256/SHA2-512/ne/Disable. LZO Compression By default Adaptive is selected. Specify the LZO Compression scheme. Select from Adaptive/YES//Default. Persis Key 1. Optional setting. Check the Enable box to activate the Persis Key function. EW200 Industrial Cellular Gateway 229 2. The box is checked by default. Persis Tun 1. Optional setting. 2. The box is checked by default. Check the Enable box to activate the Persis Tun function. Advanced Configuration Click the Edit button to specify the Advanced Configuration setting for the OpenVPN server. If the button is clicked, Advanced Configuration will be displayed below. Save Click Save to save the settings. Undo Click Undo to cancel the changes. EW200 Industrial Cellular Gateway 230 When Advanced Configuration is selected, an OpenVPN Server Advanced Configuration screen will appear.
