IS200DSPXH1A控制器模块
OpenVPN服务器功能，并指定远程OpenVPN客户端拨号时OpenVPN服务器的虚拟IP地址以及身份验证协议。OpenVPN服务器同时支持多达4个TUN/TAP隧道。OpenVPN服务器配置项值设置描述OpenVPN配置文件1。可选设置2。默认情况下未选中单击启用框以激活OpenVPN客户端配置到.ovpn文件的导出功能。您必须进一步单击导出按钮以获取配置文件。OpenVPN服务器同时支持多达4个TUN/TAP隧道。EW200工业蜂窝网关227 OpenVPN服务器配置项值设置描述默认情况下未选中OpenVPN服务器单击启用以激活OpenVPN服务器功能。方案1。所需设置2。默认情况下，选择TCP。定义用于连接到OpenVPN服务器的所选协议。选择TCP，或UDP->TCP将用于访问OpenVPN服务器，端口将设置为4430。选择UDP->UDP将用于访问OpenVPN服务器，端口将设置为1194。端口1。所需设置2。默认设置为4430。指定用于连接到OpenVPN服务器的端口。值范围：1~65535。隧道方案1。所需设置2。默认情况下，选择TUN。指定用于连接到OpenVPN服务器的隧道方案的类型。它可以是TUN隧道方案的TUN，或TAP隧道方案的TAP。授权模式1。所需设置2。默认情况下，选择TLS。指定OpenVPN服务器的授权模式。TLS->OpenVPN将使用TLS授权模式，并将显示以下项目CA证书、服务器证书和DH PEM。CA证书可以在证书中生成。请参阅对象定义>EW200工业蜂窝网关228证书>可信证书。可以在证书中生成服务器证书。请参阅对象定义>证书>我的证书。静态密钥->OpenVPN将使用静态密钥（预共享）授权模式，并将显示以下项目本地端点IP地址、远程端点IP地址和静态密钥。只有在隧道方案中选择TUN时，静态密钥才可用。需要本地终结点IP地址设置指定此OpenVPN网关的虚拟本地终结点地址。值范围：IP格式为10.8.0.x，x的范围为1~254。只有在授权模式下选择静态密钥时，本地端点IP地址才可用。需要远程终结点IP地址设置指定对等OpenVPN网关的虚拟远程终结点地址。值范围：IP格式为10.8.0.x，x的范围为1~254。远程端点IP地址仅在以下情况下可用
the OpenVPN server function and specify the virtual IP address of OpenVPN server when remote OpenVPN clients dial in, and the authentication protocol. The OpenVPN Server supports up to 4 TUN / TAP tunnels at the same time. OpenVPN Server Configuration Item Value setting Description OpenVPN Configuration File 1. Optional setting 2. Unchecked by default Click the Enable box to activate the export feature of OpenVPN Client configuration to a .ovpn file. You have to further click the Export button to get the configuration file. The OpenVPN Server supports up to 4 TUN / TAP tunnels at the same time. EW200 Industrial Cellular Gateway 227 OpenVPN Server Configuration Item Value setting Description OpenVPN Server Unchecked by default Click the Enable to activate OpenVPN Server functions. Protocol 1. Required setting 2. By default TCP is selected. Define the selected Protocol for connecting to the OpenVPN Server. Select TCP , or UDP -> TCP will be used to access the OpenVPN Server, and Port will be set to 4430. Select UDP -> UDP will be used to access the OpenVPN Server, and Port will be set to 1194. Port 1. Required setting 2. By default 4430 is set. Specify the Port for connecting to the OpenVPN Server. Value Range: 1 ~ 65535. Tunnel Scenario 1. Required setting 2. By default TUN is selected. Specify the type of Tunnel Scenario for connecting to the OpenVPN Server. It can be TUN for TUN tunnel scenario, or TAP for TAP tunnel scenario. Authorization Mode 1. Required setting 2. By default TLS is selected. Specify the authorization mode for the OpenVPN Server. TLS -> OpenVPN will use TLS authorization mode, and the following items CA Cert., Server Cert. and DH PEM will be displayed. CA Cert. can be generated in Certificate. Refer to Object Definition > EW200 Industrial Cellular Gateway 228 Certificate > Trusted Certificate. Server Cert. can be generated in Certificate. Refer to Object Definition > Certificate > My Certificate. Static Key ->The OpenVPN will use static key (pre-shared) authorization mode, and the following items Local Endpoint IP Address, Remote Endpoint IP Address and Static Key will be displayed. Static Key will be available only when TUN is chosen in Tunnel Scenario. Local Endpoint IP Address Required setting Specify the virtual Local Endpoint IP Address of this OpenVPN gateway. Value Range: The IP format is 10.8.0.x, the range of x is 1~254. Local Endpoint IP Address will be available only when Static Key is chosen in Authorization Mode. Remote Endpoint IP Address Required setting Specify the virtual Remote Endpoint IP Address of the peer OpenVPN gateway. Value Range: The IP format is 10.8.0.x, the range of x is 1~254. Remote Endpoint IP Address will be available only when
