IS200EDCFG1AED工控模块卡件
n WAN子网掩码（必需设置）：输入服务提供商提供的WAN子网。n WAN网关（必需设置）：输入服务提供商提供的WAN网关IP地址。l选择动态IP时，不需要以上设置。需要服务器IP地址/名称设置输入PPTP服务器名称或IP地址。需要PPTP帐户设置输入服务提供商提供的PPTP用户名。需要PPTP密码设置输入服务提供商提供的PPTP连接密码。连接ID可选设置输入名称以标识PPTP连接。MPPE可选设置选择启用以启用PPTP连接的MPPE（Microsoft点对点加密）安全性。EW200工业蜂窝网关36 WAN类型=L2TP选择后，将显示“L2TP WAN类型配置”。项目和设置在以下L2TP WAN类型配置项目值设置描述IP模式所需设置为L2TP Internet连接选择静态或动态IP地址。l选择静态IP地址后，您需要输入WAN IP地址、WAN子网掩码和WAN网关。n WAN IP地址（必需设置）：输入服务提供商提供的WAN IP地址。n WAN子网掩码（必需设置）：输入服务提供商提供的WAN子网。n WAN网关（必需设置）：输入服务提供商提供的WAN网关IP地址。l选择动态IP时，不需要以上设置。需要服务器IP地址/名称设置输入L2TP服务器名称或IP地址。需要L2TP帐户设置输入服务提供商提供的L2TP用户名。需要L2TP密码设置输入服务提供商提供的L2TP连接密码。需要服务端口设置输入Internet服务的服务端口。有三个选项：l自动：端口将自动分配。l 1701（对于Cisco）：将服务端口设置为端口1701以连接到Cisco服务器。l用户定义：输入服务提供商提供的服务端口。MPPE可选设置选择启用以启用PPTP连接的MPPE（Microsoft点对点加密）安全性。EW200工业蜂窝网关37以太网连接通用配置无论选择哪种类型的WAN，都需要设置一些重要参数。连接控制自动重新连接：网关启动后将自动建立Internet连接，并在连接关闭后尝试重新连接。建议为任务关键型应用程序选择此方案，以确保全时互联网连接。
n WAN Subnet Mask (Required setting): Enter the WAN subnet mask given by your service provider. n WAN Gateway (Required setting): Enter the WAN gateway IP address given by your service provider. l When Dynamic IP is selected, the above settings are t required. Server IP Address/Name Required setting Enter the PPTP server name or IP Address. PPTP Account Required setting Enter the PPTP username provided by your service provider. PPTP Password Required setting Enter the PPTP connection password provided by your service provider. Connection ID Optional setting Enter a name to identify the PPTP connection. MPPE Optional setting Select Enable to enable MPPE (Microsoft Point-to-Point Encryption) security for PPTP connection. EW200 Industrial Cellular Gateway 36 WAN Type= L2TP When selected, "L2TP WAN Type Configuration" will appear. Items and settings are explained below L2TP WAN Type Configuration Item Value setting Description IP Mode Required setting Select either Static or Dynamic IP address for L2TP Internet connection. l When Static IP Address is selected, you will need to enter the WAN IP Address, WAN Subnet Mask, and WAN Gateway. n WAN IP Address (Required setting): Enter the WAN IP address given by your service provider. n WAN Subnet Mask (Required setting): Enter the WAN subnet mask given by your service provider. n WAN Gateway (Required setting): Enter the WAN gateway IP address given by your service provider. l When Dynamic IP is selected, the above settings are t required. Server IP Address/Name Required setting Enter the L2TP server name or IP Address. L2TP Account Required setting Enter the L2TP username provided by your service provider. L2TP Password Required setting Enter the L2TP connection password provided by your service provider. Service Port Required setting Enter the service port for the Internet service. There are three options: l Auto: Port will be automatically assigned. l 1701 (For Cisco): Set service port to port 1701 to connect to CISCO server. l User-defined: enter a service port provided by your service provider. MPPE Optional setting Select Enable to enable MPPE (Microsoft Point-to-Point Encryption) security for PPTP connection. EW200 Industrial Cellular Gateway 37 Ethernet Connection Common Configuration There are some important parameters to be set up matter which type of WAN is selected. Connection Control Auto-reconnect: The gateway will establish an Internet connection automatically once it has been booted up, and try to reconnect once the connection is down. It is recommended to choose this scheme for mission critical applications to ensure full-time Internet connection.
