IS200EXTBG1AAA输出卡件,工业卡件
button键盘配置单击“下一步”按钮升级检查选择安装Fedora Core，然后选择下一步以继续安装类型选择工作站，然后选择“下一个”以继续磁盘分区设置选择自动分区，然后单击下一步继续NRC_Dev_Env_Setup_Guide_v1.0状态：已发布4屏幕操作自动分区选择删除此系统上的所有分区然后单击“下一步”继续。出现警告信息提示时，单击“是”。Boot Loader Configuration（引导加载器配置）单击Next（下一步）按钮Network Configuration（网络配置）根据需要选择DHCP或设置网络。要为静态IP设置网络，请执行以下操作：1。手动选择2。单击编辑以输入网络信息3。取消选中Configure using DHCP 4。输入要分配的IP地址（本文档中为192.168.1.13）5。输入网络掩码（255.255.255.0）6。单击“确定”7。输入主机名（dev.aka.com或您希望的任何名称）8。网关下：● 输入路由器的内部IP地址（例如192.168.1.1）● 输入主要和次要DNS信息9。单击“下一步”继续防火墙配置检查eth0以允许来自设备的所有流量。单击“下一步”继续。其他语言支持选择任何其他语言，然后单击“下一步”按钮时区选择选择适当的时区（东部时间-美国/多伦多），然后单击下一步继续设置根密码输入根密码，然后单击Next继续包安装默认值选择要安装的自定义软件包，然后单击Next继续应用程序检查服务器下的工程和科学检查服务器配置工具检查系统下的Windows文件服务器检查系统工具。单击“下一步”继续。单击Next（下一步）按钮后，将提示您即将安装Linux和应用程序；单击“下一步”继续。然后会通知您需要Fedora Core 2 CD 1、2和3（用于上面指定的配置）。单击“继续”后，将安装所有选定的软件NRC_Dev_Env_Setup_Guide_v1.0状态：已发布5个软件包。在安装过程中，请按照说明插入其他Fedora CD。安装完成后，系统将提示您重新启动电脑。单击“重新启动”继续。重新启动后，您将经历一个欢迎序列，其中收集了更多信息。附加信息包括设置用户帐户。用户id应该标识使用系统的开发人员，而不是nrcswg。nrcswg用户帐户将在稍后的设置过程中定义为项目名称。一旦输入了所有这些安装后信息，引导就会完成，Fedora Core 2就可以使用了。当您收到登录提示时，请以开发人员用户身份登录，而不是以root用户身份登录。您应该能够从网络上的其他PC ping IP地址。
button Keyboard Configuration Click on the Next button Upgrade Examine Choose Install Fedora Core and then Next to continue Installation Type Choose Workstation and then Next to continue Disk Partitioning Setup Choose Automatically partition and then Next to continue NRC_Dev_Env_Setup_Guide_v1.0 Status: Released 4 Screen Action Automatic Partitioning Choose Remove all partitions on this system and then Next to continue. Click Yes when you are prompted with the warning information. Boot Loader Configuration Click the Next button Network Configuration Choose DHCP or set-up your network according to your needs. To setup your network for static IP: 1. Select manually 2. Click on Edit to enter the network information 3. uncheck Configure using DHCP 4. enter the IP address to be assigned (192.168.1.13 in this doc) 5. enter the Netmask (255.255.255.0) 6. click OK 7. enter the Hostname (dev.aka.com or whatever you wish) 8. Under Gateway: ● enter the internal IP address of your router (e.g. 192.168.1.1) ● enter the Primary and Secondary DNS information 9. click Next to continue Firewall Configuration Check eth0 to allow all traffic from the device. Click next to continue. Additional Language Support Select any additional languages and click the Next button Time Zone Selection Choose the appropriate time zone (Eastern Time – America/Toronto) and then click Next to continue Set Root Password Enter the root password and then click Next to continue Package Installation Defaults Choose Customize software packages to be installed and then Next to continue Under Applications Check Engineering and Scientific Under Servers Check Server Configuration Tools Under Servers Check Windows File Server Under System Check System Tools. Click Next to continue. After clicking on the Next button you will be advised that you are about to install Linux and the applications; click Next to continue. You will then be advised that you will require Fedora Core 2 CDs 1, 2 and 3 (for the configuration specified above). Once you click Continue, all of the selected software NRC_Dev_Env_Setup_Guide_v1.0 Status: Released 5 packages will be installed. During the installation follow the instructions to insert the other Fedora CDs. Once the installation is complete, you will be prompted to reboot your PC. Click on Reboot to continue. Following the reboot, you will be taken through a welcome sequence where additional information is collected. The additional information includes setting up a user account. The user id should identify the developer using the system and not nrcswg. The nrcswg user account will be defined later in the set up process as the name of the project. Once all of this post-install information has been entered, the boot will complete and Fedora Core 2 is ready for use. When you receive the login prompt, login as the developer user rather than logging in as root. You should be able to ping the IP address from other PCs on the network.
