IS200ISBAH1A模块控制器,处理器模块
选择“属性”。单击“设备管理器”选项卡。选择第一个“PCI以太网控制器”（位于“其他设备”下），然后单击“属性”。4.在“PCI以太网控制器属性”窗口中，单击“驱动程序”选项卡。单击“更新驱动程序”。单击“下一步”两次。确保“软盘驱动器”是唯一选择的搜索位置，然后单击“下一步”。5.确认“更新设备驱动程序向导”显示“Windows驱动程序文件搜索设备：Intel（R）GD82559ER PCI适配器”。单击“下一步”。如果出现“复制文件”窗口，询问Windows 98SE CD-ROM的位置，请指定CD-ROM的路径（即d:\），然后单击“确定”。复制文件后，单击“完成”并取出软盘。6.在“System Settings Change”（系统设置更改）窗口中，显示“Do you want to restart your computer now？”，单击“否”。单击“关闭”。7.插入“LAN2:Intel（R）PRO Adapter Driver for Windows 9x”软盘。8.在“系统属性”窗口中，选择剩余的“PCI以太网控制器”，然后单击“属性”。9.在“PCI以太网控制器属性”窗口中，单击“驱动程序”选项卡。单击“更新驱动程序”。单击“下一步”。选择“显示所有驱动程序的列表…”然后单击“下一步”。10.在“更新设备驱动程序向导”窗口中，选择“网络适配器”并单击“下一步”。11.单击“拥有磁盘”。确保在“复制制造商文件”字段中输入“A:\”，然后单击“确定”。12.在“选择设备”窗口中，选择“Intel（R）PRO/100 VE Desktop Adapter”，然后单击“确定”。13.单击“下一步”。复制文件后，单击“完成”并取出软盘。14.在“System Settings Change”（系统设置更改）窗口中，显示“Do you want to restart your computer now？”，单击“是”。15.当计算机重新启动时，可以根据需要对显示器和网络配置进行更改。91 Microsoft Windows NTW 4.0软件驱动程序安装B Microsoft Windows NTW4.0软件驱动安装1。按照正常的Windows NTW 4.0安装，直到Windows NT Workstation Setup（Windows NT工作站设置）窗口显示“Windows NT需要知道此计算机应如何参与网络”2.选择“此时不将此计算机连接到网络”，然后单击“下一步”。3.单击“完成”。4.继续完成此部分设置。允许计算机重新启动并启动NT.5。使用安装过程中提供的密码以“管理员”身份登录。6.从提供的CD-ROM中安装Service Pack 6a。允许计算机重新启动并启动NT.7。以“管理员”身份登录。Ultra ATA存储驱动程序安装1。如果尚未安装，请插入Windows驱动程序CD-ROM。2.单击“开始”、“运行”、“浏览”。在“查找范围”下拉选择菜单中，选择“Windows驱动程序”CD-ROM。双击“WinNT”文件夹。双击“UltraATA”文件夹。双击“UltraATA”。单击“确定”。3.在“Intel Ultra ATA存储驱动程序6.1设置”窗口中，单击“下一步”。单击“是”以同意许可协议。单击“下一步”两次。4.确保选中“Yes I want to restart my computer now”（是，我想立即重新启动计算机），然后单击“Fish”（鱼）。计算机将重新启动。视频驱动程序安装1。如果尚未安装，请插入Windows驱动程序CD-ROM。2.单击“开始”、“运行”、“浏览”。在“查找范围”下拉选择菜单中，选择“Win_drivers”CD-ROM。双击“WinNT”文件夹。双击“视频”文件夹。双击“设置”，然后单击“确定”。3.在“Intel（R）810/810E/815/815E/815EM芯片集图形驱动程序软件设置”窗口中，单击“下一步”。单击“是”以同意许可协议。4.确保选中“是，我要立即重新启动计算机”，然后单击“完成”。
select ‘Properties’. Click on the ‘Device Manager’ tab. 3. Select the first ‘PCI Ethernet Controller’ (found under ‘Other devices’) and click ‘Properties’. 4. In the ‘PCI Ethernet Controller Properties’ window, click on the ‘Driver’ tab. Click ‘Update Driver’. Click ‘Next’ twice. Ensure ‘Floppy disk drives’ is the only search location selected and click ‘Next’. 5. Confirm the ‘Update Device Driver Wizard’ displays ‘Windows driver file search for the device: Intel(R) GD82559ER PCI Adapter’. Click ‘Next’. If a ‘Copying Files’ window appears asking for the location of the Windows 98SE CD-ROM, specify the path to the CD-ROM (i.e. d:\) and click ‘OK’. After files have been copied, click ‘Finish’ and remove the floppy disk. 6. At the ‘System Settings Change’ window that says ‘Do you want to restart your computer now?’, click ‘No’. Click ‘Close’. 7. Insert the ‘LAN2: Intel(R) PRO Adapter Driver for Windows 9x’ floppy disk. 8. In the ‘System Properties’ window, select the remaining ‘PCI Ethernet Controller’ and click ‘Properties’. 9. In the ‘PCI Ethernet Controller Properties’ window, click on the ‘Driver’ tab. Click ‘Update Driver’. Click ‘Next’. Select ‘Display a list of all the drivers...’ and click ‘Next’. 10. In the ‘Update Device Driver Wizard’ window, select ‘Network adapters’ and click ‘Next’. 11. Click ‘Have Disk’. Ensure ‘A:\’ is entered in the ‘Copy manufacturer’s files from’ field, and click ‘OK’. 12. At the ‘Select Device’ window, select ‘Intel(R) PRO/100 VE Desktop Adapter’ and click ‘OK’. 13. Click ‘Next’. After files have been copied, click ‘Finish’ and remove the floppy disk. 14. At the ‘System Settings Change’ window that says ‘Do you want to restart your computer now?’, click ‘Yes’. 15. When the computer reboots, changes can be made to the display and network configurations as desired. 91 Microsoft Windows NTW 4.0 Software Driver Installation B Microsoft Windows NTW 4.0 Software Driver Installation 1. Follow the normal Windows NTW 4.0 installation until the Windows NT Workstation Setup window that states ‘Windows NT needs to know how this computer should participate on a network.’ 2. Select ‘Do not connect this computer to a network at this time’ and click ‘Next’. 3. Click ‘Finish’. 4. Continue through this portion of Setup. Allow the computer to restart and boot NT. 5. Log on as ‘Administrator’, using the password provided during Setup. 6. Install Service Pack 6a from the CD-ROM provided. Allow the computer to restart and boot NT. 7. Log on as ‘Administrator’. Ultra ATA Storage Driver Installation 1. If not already present, insert the Windows Driver CD-ROM. 2. Click ’Start’, ‘Run’, ‘Browse’. In the ‘Look in’ pull-down selection menu, select the ‘Windows Drivers’ CD-ROM. Double-click on the ‘WinNT’ folder. Double-click on the ‘UltraATA’ folder. Double-click on ’UltraATA’. Click ‘OK’. 3. At the ‘Intel Ultra ATA Storage Driver 6.1 Setup’ window, click ‘Next’. Click ‘Yes’ to agree to the license agreement. Click ‘Next’ twice. 4. Ensure ‘Yes I want to restart my computer now’ is selected and click ‘Fish’. The computer will restart. Video Driver Installation 1. If not already present, insert the Windows Drivers CD-ROM. 2. Click ‘Start’, ‘Run’, ‘Browse’. In the ‘Look in’ pull-down selection menu, select the ‘Win_drivers’ CD-ROM. Double-click on the ‘WinNT’ folder. Double-click on the ‘Video’ folder. Double-click on ‘Setup’ and click ‘OK’. 3. In the ‘Intel(R) 810/810E/815/815E/815EM Chipset Graphics Driver Software Setup’ window, click ‘Next’. Click ‘Yes’ to agree to the license agreement. 4. Ensure ‘Yes, I want to restart my computer now’ is selected and click ‘Finish’.
