IS200ICBDH1ABA机械设备卡件
这可以使用辅助端子（IC200TBM001、002或005）完成。如果模块安装在终端型载体（IC200CHS001、002或005）上，则可以在连接到载体的辅助端子上进行屏蔽连接。如果模块安装在紧凑型终端式载体（IC200CHS022025）上，则可在安装在载体附近的辅助终端上进行屏蔽连接。如果计划将辅助端子排用于此目的，请确保将其接地。如果模块安装在连接器型载体（IC200CHS003）上，电缆屏蔽可直接连接到插入端子（IC200CHS011、012、015）。确保插入终端接地。建议在插入端子和连接器底座之间使用屏蔽插入电缆。可使用连接器套件（IC200ACC304）制作定制屏蔽电缆。此外，可以在标准插入电缆（IC200CBL105、110、120、230）周围缠绕定制屏蔽编织层。如果使用这种方法，请确保将编织物接地。GFK-1504N第14章温度传感模块14-7 14 IC200ALG620模拟输入，16位RTD，4通道可配置参数RTD输入模块的默认参数可用于许多应用。当模块安装在VersaMax PLC系统或由2.0版或更高版本的NIU控制的工作站中时，可以对其进行软件配置。模块参数描述默认选择模拟输入数据长度模块模拟输入数据的字长。4 0–4模拟输入数据参考模块模拟输入数据的起始偏移。用户可选线路频率指定线路频率。60 Hz 50 Hz，60 Hz信道激活指定信道是否应返回数据和警报。如果通道为“非活动”，则仍为其分配空间。活动非活动（关闭）、活动（打开）单位每个RTD的转换类型。摄氏度十分之一Ω, 十分之一°C或十分之一°F RTD类型用于每个通道的RTD类型。100 PT 385 10 PT，25 PT，25.5 PT 392，100 PT 385，100 PT 3902，100 PT 392、100 PT 3923，100 PT 3916，1K PT 375，10 CU，10 CU 427，50 CU 427、100 CU 427和100 NI，100 NI 618，120 NI 672 604 NI/FE 518，1K NI/FE 527，500 Ohm，3000 Ohm电线类型每个RTD的现场接线类型。3线、3线、4线报警低通道的低报警限值，以工程单位表示2000–32768至+32767警报上限通道的警报上限，单位为工程单位。8000–32768至+32767标称电阻可选电阻调整，单位为Ω. 0 0到3276.7通道默认输入指定出错时返回的模拟输入（包括开路错误）。0+3276.7 14-8 VersaMax模块、电源和载波用户手册GFK-1504N 14 IC200ALG620模拟输入，16位RTD，4信道模块功能信道激活每个信道可以配置为激活或非激活。
This can be done using an Auxiliary Terminal (IC200TBM001, 002, or 005). If the module is installed on a Terminal-style Carrier (IC200CHS001, 002, or 005), shield connections can be made on an Auxiliary Terminal that is attached to the carrier. If the module is installed on a Compact Terminal-style Carrier (IC200CHS022, 025), shield connections can be made on an Auxiliary Terminal that is mounted near the carrier. Be sure to ground the Auxiliary Terminal Strip if you plan to use it for this purpose. If the module is installed on a Connector-style Carrier (IC200CHS003), the cable shield can be connected directly to an Interposing Terminal (IC200CHS011, 012, 015). Be sure to ground the Interposing Terminal. It is recommended to use a shielded interposing cable as well between the Interposing Terminal and the Connector Base. A custom shielded cable can be made using the Connector kit (IC200ACC304). In addition, a custom shield braid can be wrapped around standard Interposing Cables (IC200CBL105, 110, 120, 230). If this approach is used be sure to ground the braid. GFK-1504N Chapter 14 Temperature Sensing Modules 14-7 14 IC200ALG620 Analog Input, 16 Bit RTD, 4 Channels Configurable Parameters The default parameters of the RTD Input module can be used in many applications. The module can be software-configured when it is installed in a VersaMax PLC system or an Station controlled by a NIU that is version 2.0 or above. Module Parameter Description Default Choices Analog Input Data Length Word length of the module’s analog input data. 4 0–4 Analog Input Data Reference Starting offset for the module’s analog input data. user selectable Line Frequency Specifies the line frequency. 60 Hz 50 Hz, 60 Hz Channel Active Specifies if the channel should return data and alarms. If a channel is “inactive” space is still allocated for it. Active Inactive (off), Active (on) Units The conversion type for each RTD. Deg C tenths of Ω, tenths of °C, or tenths of ° F RTD Type The type of RTD used for each channel. 100 PT 385 10 PT, 25 PT, 25.5 PT 392, 100 PT 385, 100 PT 3902, 100 PT 392, 100 PT 3923, 100 PT 3916, 1K PT 375, 10 CU, 10 CU 427, 50 CU 427, 100 CU 427, 100 NI, 100 NI 618, 120 NI 672 604 NI/FE 518, 1K NI/FE 527, 500 Ohm, 3000 Ohm Wire Type The type of field wiring for each RTD. 3 Wire 3 Wire, 4 Wire Alarm Low The low alarm limit for the channel, in engineering units. –2000 –32,768 to +32,767 Alarm High The high alarm limit for the channel, in engineering units. 8000 –32,768 to +32,767 Nominal Resistance An optional resistance adjustment, in tenths of Ω. 0 0 to 3276.7 Channel Default Input Specifies analog input returned upon error (including open circuit errors). 0 + 3276.7 14-8 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N 14 IC200ALG620 Analog Input, 16 Bit RTD, 4 Channels Module Features Channel Active Each channel can be configured as either active or inactive.
