您的浏览器版本过低,为保证更佳的浏览体验,请点击更新高版本浏览器

以后再说X

欢迎访问瑞昌明盛自动化设备有限公司网站!

图片名

全国订购热线:
+86 15270269218E-mail:stodcdcs@gmail.com

ABB >>

A-B>>

GE>>

BENTLY>>

IS200RAPAG1A DCS工控模块备件

IS200RAPAG1A DCS工控模块备件

IS200RAPAG1A DCS工控模块备件GFK-1504N第1章引言1-19 1 VersaMax通用产品规范VersaMax产品的安装和使用应符合产品特定指南以及下表中列出的规范。环境振动IEC68-2-6 1G,57-150Hz,0.012in p--p,10-57Hz,冲击IEC68-2-27 15G,11ms工作温度0至+60摄氏度环境温度-40至+60华氏度环境温度,适用于载波、通信...

  • 功能特性
  • 参数规格
  • 视频
  • 应用案例
  • 下载

IS200RAPAG1A DCS工控模块备件

    IS200RAPAG1A DCS工控模块备件

    GFK-1504N第1章引言1-19 1 VersaMax通用产品规范VersaMax产品的安装和使用应符合产品特定指南以及下表中列出的规范。环境振动IEC68-2-6 1G,57-150Hz,0.012in p--p,10-57Hz,冲击IEC68-2-27 15G,11ms工作温度0至+60摄氏度环境温度-40至+60华氏度环境温度,适用于载波、通信载波、插入终端和辅助终端存储温度-40至+85摄氏度湿度5%至95%,符合IP54的非冷凝外壳防护IEC529钢柜:防尘和溅水EMC辐射传导CISPR 11/EN 55011工业科学和医疗设备(1组,A类)CISPR 22/EN 55022信息技术设备(A类)FCC 47 CFR 15称为FCC第15部分,无线电设备(A类)EMC抗扰度静电放电EN 61000-4-2 8KV空气,4KV接触射频敏感性EN 61000-4-3 10Vrms/m,80至1000Mhz,80%AM ENV 50140/ENV 50204 10Vrms/m、900MHz±5MHZ 100%AM,200Hz方波快速瞬变脉冲EN 61000-4-4 2KV:电源,1KV:通信浪涌耐受ANSI/IEEE C37.90a阻尼振荡波:2.5KV:电源,[12V-240V]IEC255-4阻尼振荡波:II级,电源,[12V-240V]EN 61000-4-5 2 kV cm(P/S);1 kV cm(和通信模块)传导RF EN 61000-4-6 10Vrms,0.15至80Mhz,80%AM绝缘介电耐受UL508,UL840,IEC664 1.5KV,适用于额定51V至250V电源输入Dips的模块,运行期间的变化EN 61000-4-11:Dips至30%和100%,AC±10%的变化,DC±20%GFK-1504N 2-1安装的变化本节提供以下安装说明:安装前检查是否符合标准热间隙DIN导轨和面板安装安装托架扩展系统安装安装电源系统布线指南系统接地安装设备布线安装模块第2章2-2 VersaMax模块、电源和托架用户手册GFK-1504N 2安装前检查仔细检查所有运输集装箱在运输过程中是否损坏。如果系统的任何部分损坏,请立即通知配送服务部门。损坏的运输集装箱应保存为证据,以供交付服务部门检查。用户有责任向交付服务部门登记运输过程中发生的损坏索赔。拆开VersaMax模块和其他设备后,记录所有序列号。如果您需要在设备保修期内联系产品服务,则需要序列号。如果需要运输或装运系统的任何部分,则应保存所有装运集装箱和所有包装材料。符合标准在需要符合联邦通信委员会、加拿大通信部或欧盟的标准或指令的情况下安装VersaMax产品之前,请参阅GFK-1179《符合标准的安装要求》。▪ 电源模块:请务必阅读每个电源模块随附的安装说明。这些说明规定了电源用铜导线的使用、线规和类型。▪ 控制电路模块:请务必阅读随模块提供的安装说明。这些说明规定了铜导体的使用、线规和类型要求。▪ 标有I级2区A、B、C和D组危险场所标签的设备仅适用于I级2分区A、B和C组D或非危险场所。▪ 标有I类、2区、A、B、C和D组危险场所的设备仅适用于I类、3区、A组、B组、C组、D组或非危险场所。▪ CPU类别编号IC200CPU001和IC200CPU002的电池只能更换为松下编号BR2032的电池。正确的电池类型作为附件套件IC200ACC001提供。GFK-1504N第2章安装2-3 2危险场所安装▪ 警告-爆炸危险-更换部件可能会影响I类2类的适用性;▪ 警告-爆炸危险-当处于危险位置时,在更换或接线模块之前关闭电源;以及▪ 警告-爆炸危险-除非电源已关闭或该区域无危险,否则不要连接或断开设备。

    .GFK-1504N Chapter 1 Introduction 1-19 1 VersaMax General Product Specifications VersaMax products should be installed and used in conformance with productspecific guidelines, as well as the specifications listed in the following table. Environmental Vibration IEC68-2-6 1G at 57-150Hz, 0.012in p--p at 10-57Hz Shock IEC68-2-27 15G, 11ms Operating Temperature 0 to +60 deg C ambient -40 to +60 deg C ambient for carriers, communications carrier, interposing terminals, and auxiliary terminals Storage Temperature -40 to +85 deg C Humidity 5% to 95%, noncondensing Enclosure Protection IEC529 Steel cabinet per IP54: protection from dust & splashing water EMC Emission Radiated, Conducted CISPR 11/EN 55011 Industrial Scientific & Medical Equipment (Group 1, Class A) CISPR 22/EN 55022 Information Technology Equipment (Class A) FCC 47 CFR 15 Referred to as FCC part 15, Radio Devices (Class A) EMC Immunity Electrostatic Discharge EN 61000-4-2 8KV Air, 4KV Contact RF Susceptibility EN 61000-4-3 10Vrms /m, 80 to 1000Mhz, 80% AM ENV 50140/ENV 50204 10Vrms/m, 900MHz ±5MHZ 100%AM with 200Hz square wave Fast Transient Burst EN 61000-4-4 2KV: power supplies, 1KV: , communication Surge Withstand ANSI/IEEE C37.90a Damped Oscillatory Wave: 2.5KV: power supplies, [12V-240V] IEC255-4 Damped Oscillatory Wave: Class II, power supplies, [12V-240V] EN 61000-4-5 2 kV cm(P/S); 1 kV cm ( and communication modules) Conducted RF EN 61000-4-6 10Vrms, 0.15 to 80Mhz, 80%AM Isolation Dielectric Withstand UL508, UL840, IEC664 1.5KV for modules rated from 51V to 250V Power Supply Input Dips, Variations EN 61000-4-11 During Operation: Dips to 30% and 100%, Variation for AC ±10%, Variation for DC ±20% GFK-1504N 2-1 Installation This section provides the following installation instructions: Pre-installation Check Conformance to Standards Thermal Clearance DIN Rail and Panel Mounting Installing Carriers Expansion System Installation Installing a Power Supply System Wiring Guidelines System Grounding Installing Wiring for Devices Installing Modules Chapter 2 2-2 VersaMax Modules, Power Supplies and CarriersUser Manual GFK-1504N 2 Pre-installation Check Carefully inspect all shipping containers for damage during shipping. If any part of the system is damaged, notify the delivery service immediately. The damaged shipping container should be saved as evidence for inspection by the delivery service. It is the user’s responsibility to register a claim with the delivery service for damage incurred during shipment. After unpacking the VersaMax modules and other equipment, record all serial numbers. Serial numbers are required if you should need to contact Product Service during the warranty period of the equipment. All shipping containers and all packing material should be saved should it be necessary to transport or ship any part of the system. Conformance to Standards Before installing VersaMax products in situations where compliance to standards or directives from the Federal Communications Commission, the Canadian Department of Communications, or the European Union is required please refer to GFK-1179, Installation Requirements for Conformance to Standards. ▪ Power Supply Modules: Be sure to read the installation instructions provided with each Power Supply module. These instructions specify the use of copper conductors for the power supply, wire gauge and type. ▪ Control circuit modules: Be sure to read the installation instructions provided with the module. These instructions specify the use of copper conductors and wire gauge and type requirements. ▪ Equipment labeled with reference to Class I, Div. 2, Groups A, B, C and D, Hazardous Locations is suitable for use in Class I, Div. 2, Groups A, B, C, D or non-hazardous locations only. ▪ Equipment labeled with reference to Class I, Zone 2, Groups A, B, C and D, hazardous locations is suitable for use in Class I, Zone 2, Groups A, B, C, D or non-hazardous locations only. ▪ Battery in CPU Category No. IC200CPU001 and IC200CPU002 is to be replaced only with Matsushita No. BR2032. The correct battery type is available as Accessory Kit IC200ACC001. GFK-1504N Chapter 2 Installation 2-3 2 Installation in Hazardous Locations ▪ WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2; ▪ WARNING - EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE REPLACING OR WIRING MODULES; AND ▪ WARNING - EXPLOSION HAZARD - DO NOT CONNECT OR DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS.

    手机轮播图2(1)_副本.jpg

    21.jpg

    20.jpg

    1.jpg



    品牌: GE

    型号:IS200RAPAG1A 

    产地:美国

    质保:365天

    成色:全新/二手

    发货方式:快递发货


图片名 客服

在线客服 客服一号