IS215UCVEM09控制卡件
嵌入式CPU具有以下功能：无法更改CPU类型。它们不支持使用扩展或远程机架，因此这些机架不具有像lar CPU那样的扩展。型号和是插槽，型号是插槽。由于它们不需要插件CPU，所有编号的插槽（包括插槽）都可以用于或选项s。内存备份电池位于电源中；因此，如果电源从电池中拔出，则电池将与位于背板上的内存断开。然而，背板包含一个高值容量，有时是计算的超级容量，如果电源被移除或电池断开，它可以在内存中存储足够的电量约一小时。apr讨论了ICACC电池配件套件，当电源从嵌入式CPU中移除时，该套件可用于内存连接。型号或上没有配置开关或跳线。嵌入式CPU始终由默认机架编号零分配。Q apr s POWER BASE SLOT用户程序控制器SYSM PROM PROM程序PROM警告电源和REGISR值可能会丢失，如果使用CPU内存备份电源超过一小时，则警告标签描述标签上写有CPU替换ab SYSM固件PROM插槽用于可选程序PROM非CPU插槽CP U图。型号ICCPU和ICCPU插槽嵌入式CPU的POWER BASE插槽控制器用户程序小时。如果电源值为Y，则电源断开的时间比拆除的时间长，请注意使用CPU非CPU插槽CP U SYSM PROM PROM程序PROM图供电。型号ICCPU插槽嵌入式CPU安装和硬件八月Q lar CPU的数字和电源必须插入ft插槽中，而不是这些插槽的编号。ft插槽的大小和类型是唯一的，仅支持电源。CPU或特殊选项必须安装在这些s的插槽中。插槽是唯一的大小和类型，仅支持CPU或FIP Remo Scanner ICBEM等特殊选项。插槽标记为CPU。编号及以上的插槽具有唯一的大小和类型，仅支持或选项s。扩展和Remo s是受支持的，因此引脚Dtype fe扩展位于的右端，用于连接扩展或Remo。由于CPU是小型的，如果需要额外的功能，可以更换或更改为不同的类型。每个系统只允许一个CPU。如果一个系统中使用了多个，则其他类型必须是Expansion或Remo类型。lar CPU始终由默认机架号分配。CP U控制器基本插槽警告：如果断电时间超过一小时，则用户程序和REGISR值可能会丢失。ICS插槽极CPU控制器基槽电源CPU电源非CPU插槽非CPU插槽C PU E X P A N S I O N用户程序和REGISR值如果断电时间超过一小时，将丢失警告图。ICS插槽lar CPU Q apr s扩展的数字和连接扩展和CPU的驾驶室长度不能超过10英尺。扩展不能单独存在。它必须连接到具有CPU的系统。CPU可以位于或位于配备有个人pur接口卡的个人pur中，请参阅apr。每个系统允许的扩展数取决于所使用的CPU类型。对于CPU和is。对于编号为的CPU
The embedded CPU s have the following features: The CPU type cannot be anged. They do not support the use of expansion or remo racks so these racks do not have an expansion like the lar CPU s do. The models and are slot s and the model is a slot . Since they do not require a plugin CPU all numbered slots including Slot can be used for or Option s. The memory backup batry is locad in the Power Supply ; so if the Power Supply is unplugged from the the batry will be disconnecd from the memory s whi are locad on the backplane board. However the backplane board contains a high value capacir sometimes cald super capacir that can sre enough arge intain the memory s for about hour if the Power Supply is removed or its batry is disconnecd. apr discusses the ICACC Batry Accessory kit that can be used intain memory connts when the Power Supply is removed from an embedded CPU . There are no configuration swis or jumpers on the Model or s. An embedded CPU is always assigned by default Rack Number Zero . Q apr s POWER BASE SLOT USER PROGRAM CONTROLR SYSM PROM PROGRAM PROM CAUTION SUPPLY AND REGISR VALUES Y BE LOST IF POWER SUPPLY IS REMOVED FOR LONGER THAN HOUR WITH CPU Memory Backup Warning Label Description Label Says With CPU Replaceab Sysm firmware PROM Socket for Optional Program PROM NONCPU SLOTS CP U Figure . Models ICCPU and ICCPU Slot Embedded CPU s POWER BASE SLOT CONTROLR USER PROGRAM HOUR. LONGER THAN REMOVED FOR SUPPLY IS LOST IF POWER VALUES Y BE AND REGISR CAUTION SUPPLY WITH CPU NONCPU SLOTS CP U SYSM PROM PROGRAM PROM Figure . Model ICCPU slot Embedded CPU Installation and Hardware August Q lar CPU s Figures and A Power Supply must be plugged in the ft slot whi is not numbered of these s. The ft slot is a unique size and type that only supports a Power Supply . A CPU or a special Option must be instald in Slot of these s. Slot is a unique size and type that only supports a CPU or a special Option like the FIP Remo Scanner ICBEM. Slot is labed CPU. Slots numbered and above are of a unique size and type that only supports or Option s. Expansion and Remo s are suppord so a pin Dtype fe expansion is locad at the right end of the for connecting an Expansion or Remo . Since the CPU is lar it can be replaced or anged a different type if additional features are desired. Only one CPU is allowed per sysm. If more than one is used in a sysm the additional ones must be either Expansion or Remo types. A lar CPU is always assigned by default Rack Number . CP U CONTROLR BASE SLOT CAUTION USER PROGRAM AND REGISR VALUES Y BE LOST IF POWER SUPPLY IS REMOVED FOR LONGER THAN HOUR POWER SUPPLY NONCPU SLOTS E X P A N S I O N CPU Figure . ICS Slot lar CPU CONTROLR BASE SLOT POWER CPU SUPPLY NONCPU SLOTS NONCPU SLOTS C PU E X P A N S I O N USER PROGRAM AND REGISR VALUES Y BE LOST IF POWER SUPPLY IS REMOVED FOR LONGER THAN HOUR CAUTION Figure . ICS Slot lar CPU Q apr s Expansion s Figures and There can be no more than a tal of feet mers of cab inrconnecting Expansion s and the CPU . An Expansion cannot stand alone. It must be connecd a sysm that has a CPU. The CPU can be in a or in a Personal pur that is equipped with a Personal pur Inrface Card see apr . number of Expansion s allowed per sysm depends on the type of CPU they are used with. For CPUs and the is . For CPUs numbered
