IS215UCVGH1AC模拟量输入模块
较新的点在前面有两个销。这些可以通过三种方式之一来实现。使用一个驾驶室ICCBL，请参阅驾驶室中的数据表，以连接用户提供的面板垫块或板条。这些出租车的一端有一个销，另一端有带标志的镀锡广告。使用一个双驾驶室连接一个Block Quick connect TBQC Block ICACC。详见附录H。开你自己的出租车。说明见4月的ICCBL数据表。接线板上有一个或多个螺丝，可接受两个AWG#。mm两AWG#。mm或一个AWG#。mm铜C F s.Ea可接受实心或绞合的s，但任何给定的s应为同一类型，实心或绞合均可确保良好连接。s是成组的，从s离开板腔底部。板连接螺钉的建议扭矩来自。入口。导入。。纽恩默斯。Q apr安装对于电压直流输入，在板上提供了内部电压电源连接，输入设备数量有限。此外，在电源板上也有一伏直流电，为有限数量的设备供电。点差异的块快速连接安装块快速连接TBQC组件是某些差异的选项。更多信息请参见附录H。从中移除标准板。安装TBQC面板，它有一个销。安装TBQC块。它有一个销和一条带，安装在标准mm DIN导轨上。将TBQC驾驶室连接在上的TBQC面板和TBQC块上的之间。设备块。安装Point Discre引脚这些引脚是较旧的设计，通常不用于新系统，但符合标准化要求。它们主要用作现有装置的替代品。对于新的安装，我们记住了双销系统，因为它们具有旧的D标记TBQC中没有的附加功能，并且更容易为它们制造驾驶室。此处提供了安装信息，以方便仍在使用这些设备的用户。使用Weidmullr#模块编号：TBQC不适用于这些设备，但您可以从您的电子分销商处购买用于此应用的Weidmullr#。安装Weidmullr#块。它有一个销和一条带，安装在标准mm DIN导轨上。将ICCBL驾驶室连接在的面板和Weidmullr块上的之间。驾驶室数据见apr。设备块。有关引脚信息，请参阅规范。安装和硬件8月Q日使用通用块或条装式块对机柜面板进行条装。将ICCBL或驾驶室或驾驶室的面板和驾驶室的剥离端连接到挡块上。驾驶室数据见apr。设备阻止条。直接方法将ICCBL或驾驶室或驾驶室的面板和驾驶室的剥离端直接连接到现场设备。驾驶室数据见apr。有关引脚信息，请参阅规范。使用TBQC安装两个TBQC块安装差异点双销。Ea有一个销和一个条，安装在标准mm DIN导轨上。连接TBQC驾驶室ICCBL
Newer point s have two pin s on the front of the . These y be d in one of three ways. Use a of cabs ICCBL see data sheet in Cabs apr connect the a usersupplied panelmound block or strip. These cabs have a pin on one end and stripped tinned ads with rkers on the other end. Use a of dual cabs connect the a Block Quick Connect TBQC block ICACC. See Appendix H for details. ke your own cusm cabs. Instructions are found in the ICCBL data sheet in apr . Connections Boards boards have either or screw s that will accept from two AWG # . mm two AWG # . mm or one AWG # . mm copper C F s. Ea can accept solid or stranded s but the s in any given should be the same type both solid or both stranded ensure a good connection. s are roud and from the s out of the botm of the board cavity. The suggesd rque for the board connection screws is from . inlbs . inlbs .. Newnmers. Q apr Installation For volt DC input s an inrnal volt power connection is provided on the board supply a limid number of input devices. Also a volt DC is availab on the power supply ’s board supply a limid number of devices. Block Quick Connect Installation for Point Discre s The Block Quick Connect TBQC Assembly is an option for certain discre s. See Appendix H for more infortion. Remove standard board from . Install TBQC facepla it has a pin . Mount the TBQC block. It has a pin and a strip and mounts on a standard mm DINrail. Connect a TBQC cab between the TBQC facepla on the and the on the TBQC block. devices the block. Installation of Point Discre Pin s These Pin s are an older design and are not generally used on new sysms unss fulfill standardization requirements. They are inly used as replacements for existing installations. For new installations we remend the dual pin sty because they have additional features not found on the older s D indicars TBQC and it is mu easier fabrica cusmngth cabs for them. Installation infortion is provided here for the convenience of those still using these s. Using Weidmulr # Block No: The TBQC is not availab for these s but you y purase a Weidmulr # from your ectronics distribur for this application. Mount the Weidmulr# block. It has a pin and a strip and mounts on a standard mm DINrail. Connect an ICCBL cab between the ’s facepla and the on the Weidmulr block. See apr for cab data. devices the block. See the Specifications for pinout infortion. Installation and Hardware August Q Using a Generic Block or Strip Mount blockstrip the enclosure panel. Connect an ICCBL or cab or a cusm de cab the ’s facepla and the stripped ends of the cab the blockstrip. See apr for cab data. devices the blockstrip. Direct Method Connect an ICCBL or cab or a cusm de cab the ’s facepla and the stripped ends of the cab directly the field devices. See apr for cab data. See the Specifications for pinout infortion. Installation of Discre Point Dual Pin s Using a TBQC Mount two TBQC blocks. Ea has a pin and a strip and mounts on a standard mm DINrail. Connect a of TBQC cabs ICCBL
