IS220PDIOH1A/IS220PAICH2A系统模块卡件
外部扬声器手持设备（例如WSHS 50P-JST）扩展插孔（例如用于EB2E2AHE）IP上行链路+PoE OBS关于质量安全和通信的基本信息产品的设计和/或规格可能会因改进而更改，恕不另行通知。错误除外。SIP-WS 800P数据表V1.0/0416 IN |2安装说明–不要将工作站暴露在极端温度下（参见TE |1上的“技术规范”）。–对于齐平安装，需要齐平安装套件WSFB 50P（单独提供）。–表面安装，需要表面安装套件WSSH 50P（独立提供）。尺寸前面板测量单位为mm（英寸），不按比例！建议安装高度站的上边缘距离完工地板约1.65米（5.4英尺）。请根据个人需要调整安装高度。约1.65 m（5.4 ft）成品地板165（6.5）280（11）深度：13（0.51）空腔壁安装：15（0.59）(前面板和墙壁之间的阴影间隙）一个强大的全球网络COMMEND由当地的COMMED合作伙伴在世界各地代表，并通过定制的内部通信解决方案帮助改善安全和通信。www.commend.com质量测试。可信赖的聪明的COMMAND产品由位于奥地利萨尔茨堡的COMMAND International开发和制造。开发和制造过程根据EN ISO 9001:2015进行认证。本文所含技术数据仅供参考，不具有法律约束力。可能发生技术或其他变更。IoIP®、OpenDuplex®和Commud®是由Commud International GmbH注册的商标。所有其他品牌或产品名称均为各自所有者的商标或注册商标，未明确指定。
External loudspeaker Handset (e.g. WSHS 50P-JST) Expansion jack (e.g. for EB2E2AHE) IP uplink + PoE OBS ESSIVE ABOUT QUAL ITY Security and Communication The design and/or specifications of products may be subject to change for improvement without prior notice. Errors excepted. SIP-WS 800P DATASHEET V1.0/0416 IN | 2 Mounting instructions – Do not expose the station to extreme temperature (see “Technical Specifications“ on TE | 1). – For flush mounting, a flush mount kit WSFB 50P (available separately) is required. – For surface mounting, a surface mount kit WSSH 50P (available separately) is required. Dimensions front panel Measuring units in mm (inch), not to scale! Recommended mounting height The upper edge of the station approx. 1.65 m (5.4 ft) from the finished floor. Please adapt the mounting height to the individual needs. approx. 1.65 m (5.4 ft) Finished floor 165 (6.5) 280 (11) Depth: 13 (0.51) cavity wall mounting: 15 (0.59) (shadow gap between front panel & wall) A strong worldwide network COMMEND is represented all over the world by local Commend Partners and helps to improve security and communication with tailored Intercom solutions. www.commend.com Quality tested. Reliable. Smart. COMMEND products are developed and manufactured by Commend International in Salzburg, Austria. The development and manufacturing processes are certified in accordance with EN ISO 9001:2015. The technical data contained herein has been provided solely for informational purposes and is not legally binding. Subject to change, technical or otherwise. IoIP®, OpenDuplex® and Commend® are trademarks registered by Commend International GmbH. All other brands or product names are trademarks or registered trademarks of the respective owner and have not been specifically earmarked.
