KUC711AE 3BHB004661R0001模块备件
绿色/黄色闪烁2.5 Hz：Teh指示绿色/黄色闪光8.0 Hz：Teh-error连接类型4针微型（M12）提供的附件无环境工作环境IP65振动1055 Hz，0.5振幅；3个平面；符合或超过IEC 60068-2-6冲击30 g；11毫秒：3个平面：满足或超过IEC 60068-2-27工作温度-3050°C（-22122°F）存储温度-3070°C（-21158°F）2 45LMS的8米和50米型号为1类激光产品。1级激光器在所有正常使用条件下都是安全的。这意味着不可能超过最大允许暴露（MPE）。45LMS的15米型号为2类激光产品。2级激光连续凝视是不安全的；然而，人眼的眨眼反射将防止眼睛受损，除非人故意长时间盯着光束。尺寸[（in.）]安装将传感器牢固地安装在牢固、稳定的表面或支架上，以实现可靠的操作。过度振动或移动的安装可能会导致间歇性操作。45LMS-BKT1安装支架可用于安装方便。一旦牢固安装，传感器可以按照下一节中的接线说明进行接线。Interfe Interfe类型IO链路协议IO链路V1.0周期时间最小2.3 ms模式2（38.4 kBaud）处理数据宽度16位SIO模式支持是8米和50米型号激光1类15米型号激光2类不凝视光束88（3.47）102（4.02）11（.43）6（0.24）62（2.44）93（3.66）10（.39）54.6（2.15）▸5.2（▸0.205）14.8（0.58）8（0.32）1类激光产品层，日期为6月24日，21 CFR，2007 1040.10和1040.11，根据第50号激光公告、IEC 60825-1:2007认证的偏差除外2（0.08）25.8（1.02）9（0.36）9.8（0.39）M12 23.8（0.94）12（0.47）18（0.71）54.9（2.16）7（0.28）A激光输出45LMS-BKT1安装支架[（in。)]接线NPN或PNP（推拉式）45LMS光电传感器配有微型快速断开装置，便于安装和维护。罗克韦尔自动化公司推荐使用889系列跳线和跳线，用于快速断开型号传感器。所有外部接线应符合国家电气规范和所有适用的地方规范。45LMS具有推挽式离散输出。这意味着输出总是驱动24V或0V，因此可以像NPN或PNP传感器一样。控制和指示器设置传感器45LMS使用旋转开关和set按钮设置，并通过传感器顶部的黄色和绿色LED指示器显示feedbk。
Green/Yellow Flashing 2.5 Hz: Teh indication Green/Yellow Flashing 8.0 Hz: Teh error Connection Type 4-Pin Micro (M12) Supplied cessories None Environmental Operating Environment IP65 Vibration 1055 Hz, 0.5 amplitude; 3 planes; meets or exceeds IEC 60068-2-6 Shock 30 g; 11 ms: 3 planes: meets or exceeds IEC 60068-2-27 Operating Temperature -3050° C (-22122° F) Storage Temperature -3070°C (-22158°F) 2 The 8 m & 50 m models of the 45LMS are Class 1 laser products. A Class 1 laser is safe under all conditions of normal use. This means the maximum permissible exposure (MPE) is impossible to exceed. The 15 m models of the 45LMS are Class 2 laser products. A Class 2 laser is not safe to stare at continuously; however, the blink reflex of the human eye will prevent eye damage, unless the person deliberately stares into the beam for an extended period of time. Dimensions [ (in.)] Mounting Securely mount the sensor on a firm, stable surfe or support for reliable operation. A mounting subject to excessive vibration or shifting may cause intermittent operation. The 45LMS-BKT1 mounting brket is available for installation convenience. Once securely mounted, the sensor can be wi per the wiring instructions in the next section. Interfe Interfe type IO-Link Protocol IO-Link V1.0 Cycle time Min. 2.3 ms Mode 2 (38.4 kBaud) Process data width 16 bit SIO mode support Yes 8 m & 50 m MODELS Laser Class 1 15 m MODELS Laser Class 2 DO NOT STARE INTO BEAM 88 (3.47) 102 (4.02) 11 (.43) 6 (0.24) 62 (2.44) 93 (3.66) 10 (.39) 54.6 (2.15) Ø5.2 (Ø0.205) 14.8 (0.58) 8 (0.32) CLASS 1 LASER PRODUCT plies with 21 CFR dated June 24, 2007 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, IEC 60825-1: 2007 certified 2 (0.08) 25.8 (1.02) 9 (0.36) 9.8 (0.39) M12 23.8 (0.94) 12 (0.47) 18 (0.71) 54.9 (2.16) 7 (0.28) A A Laser output 45LMS-BKT1 mounting brket [ (in.)] Wiring NPN or PNP (Push-Pull) The 45LMS photoelectric sensor is available with a micro quickdisconnect for ease of installation and maintenance. Rockwell Automation recoends the use of the 889 Series of cordsets and patchcords for quick-disconnect model sensors. All external wiring should conform to the National Electric Code and all applicable local codes. The 45LMS features a Push-Pull discrete output. This means the outputs always drive either 24V or 0V and can therefore be wi like either an NPN or a PNP sensor. Controls and indicators Setting the sensor The 45LMS is set up using the Rotary Switch and the SET button, and it displays feedbk via the Yellow and Green LED indicators on the top of the sensor.
