MVME162P-244LSE工业自动化卡件
本文档中提供的信息包含本文所含产品性能的一般说明和/或技术特征。本文件不用于替代，也不用于确定这些产品对特定用户应用的适用性或可靠性。任何此类用户或集成商都有责任就相关的具体应用或使用对产品进行适当和完整的风险分析、评估和测试。施耐德电气工业SAS或其任何附属公司或子公司均不对本文所含信息的滥用负责或承担责任。8月8日，2016 1产品数据表特性140CFU00600 USE KIT 1/16 AMP QTY 10主要产品范围Modicon Quantum自动化平台附件/单独部件名称Wickmann保险丝套件附件/单独零件类型保险丝附件/单独的零件类别保险丝附件/独立的零件目的地I/O模块每套数量10个补充保险丝类型Wickmann[In]额定电流0.063要约可持续性可持续性要约状态非绿色优质产品RoHS（日期代码：YYWW）将不符合本文件中提供的信息包含本文所含产品性能的一般说明和/或技术特征。本文件不用于替代，也不用于确定这些产品对特定用户应用的适用性或可靠性。任何此类用户或集成商都有责任就相关的具体应用或使用对产品进行适当和完整的风险分析、评估和测试。施耐德电气工业SAS或其任何附属公司或子公司均不对本文所含信息的滥用负责或承担责任*价格仅供参考，7月28日，2014 1产品数据表特性140AMM09000模拟输入输出模块Modicon Quantum-4 I-2 O产品可用性：库存-通常储存在配电设施中价格*：2705.00美元主要商业状态商品化产品范围Modicon Quant自动化平台产品或组件类型输入/输出模拟模块滤波器类型单极低通-3 dB，21 Hz+/-20%输入电路互补I/O模块化6通道寻址要求2输出字5输入字模拟输入数4模拟输入类型单极电压0…5 V 15位DC单极电压0..10 V 16位DC单极偏移电压1…5 V 14位DC单极偏置电流4…20 mA 14位DC双极电流0…20 mA 15位DC双极电压+/-5 V 15比特DC双极电压+/-10 V 16位DC双极电流+/-20 mA 15位DC绝对最大输入+/-50 V电压+/-25 mA电流输入阻抗>250 Ohm电流>10 MOhm电压偏移+/-0.0014%满量程最大值/°C 0…60°C输入电路增益偏移+/-0.002满量程最大0…60℃输入电路共模抑制>80 dB 50/60 Hz输入电路模拟输出2模拟输出范围4…20 mA模拟输出分辨率12位回路电压7…30 V DC输出电路<=60 V DC，带外部电阻输出电路电压降7…30伏DC 20 mA设置时间900µs至最终值输出电路的+/-0.1%外部功率要求7…30 V输出电路77°F（25°C）时绝对精度误差为满量程的+/-0.20%输出电路+/-0.05%77°F（25°C）时满量程最大值的+/-0.03%输入电路77°F，和-9.6%欠量程电流2.4%过量程电压和欠量程电压2更新时间320 ms输入电路15 ms输出电路故障类型状态字节输出电路超跟踪刻度（单极）输入电路开路输入/输出电路通道之间的隔离750 V DC 1分钟500 V AC 1分钟通道和总线之间的隔离750V DC 1小时500 V AC输入通道和输出通道之间750 V持续1分钟500 V持续1小时标记CE本地信号6个LED红色通道故障6个LED绿色通道打开
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Aug 8, 2016 1 Product data sheet Characteristics 140CFU00600 USE KIT 1/16 AMP QTY 10 Main Range of product Modicon Quantum automation platform Accessory / separate part designation Wickmann fuse kit Accessory / separate part type Fuses Accessory / separate part category Fuses Accessory / separate part destination I/O module Quantity per set Set of 10 Complementary Fuse type Wickmann [In] rated current 0.063 A Offer Sustainability Sustainable offer status Not Green Premium product RoHS (date code: YYWW) Will not be CompThe information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. *Prices are indicative Jul 28, 2014 1 Product data sheet Characteristics 140AMM09000 analog input output module Modicon Quantum - 4 I - 2 O Product availability: Stock - Normally stocked in distribution facility Price*: 2705.00 USD Main Commercial Status Commercialised Range of product Modicon Quantum automation platform Product or component type Input/Output analog module Type of filter Single pole low pass - 3 dB at 21 Hz +/- 20 % input circuit Complementary I/O modularity 6 channels Addressing requirement 2 output words 5 input words Analogue input number 4 Analogue input type Unipolar voltage 0...5 V 15 bits DC Unipolar voltage 0...10 V 16 bits DC Unipolar offset voltage 1...5 V 14 bits DC Unipolar offset current 4...20 mA 14 bits DC Unipolar current 0...20 mA 15 bits DC Bipolar voltage +/- 5 V 15 bits DC Bipolar voltage +/- 10 V 16 bits DC Bipolar current +/- 20 mA 15 bits DC Absolute maximum input +/- 50 V voltage +/- 25 mA current Input impedance > 250 Ohm current > 10 MOhm voltage Offset +/- 0.0014 % of full scale maximum/°C 0...60 °C input circuit Gain shift +/- 0.002 of full scale maximum 0...60 °C input circuit Common mode rejection > 80 dB 50/60 Hz input circuit Analogue output number 2 Analogue output range 4...20 mA Analogue output resolution 12 bits Loop voltage 7...30 V DC output circuit <= 60 V DC with external resistance output circuit Voltage drop 7...30 V DC 20 mA Setting time 900 µs to +/- 0.1 % of the final value output circuit External power requirement 7...30 V output circuit Absolute accuracy error +/- 0.20 % of full scale at 77 °F (25 °C) output circuit +/- 0.05 % of full scale maximum at 77 °F (25 °C) input circuit +/- 0.03 % at 77 °F (25 °C) input circuit +/- 0.007 %/°C of full scale maximum at 32...140 °F (0...60 °C) output circuit +/- 0.004 % of full scale at 32...140 °F (0...60 °C) output circuit Linearity Monotonic +/- 1 LSB output Monotonic +/- 1 LSB input 2.4 % over range, and - 9.6 % under range current 2.4 % over and under range voltage 2 Update time 320 ms input circuit 15 ms output circuit Fault type Status byte output circuit Overtacking scale (unipolar) input circuit Open circuit input/output circuit Isolation between channels 750 V DC for 1 minute 500 V AC for 1 minute Isolation between channels and bus 750 V DC for 1 minute 500 V AC for 1 minute Isolation between input channels and output channels 750 V for 1 minute 500 V for 1 minute Marking CE Local signalling 6 LEDs red channel fault 6 LEDs green channel is turned on
