MVME172-263工控模块备件
传统与模块化目录号（续）公告800T油密选择开关产品数据4以下是所有不同类型接触块的说明：浅块公告800H和800T设备的标准一个或两个电路接触块有各种单电路和双电路接触块直接驱动分叉扳手➀ 对于24V和24mA以下的应用，建议使用逻辑簧片或五分叉接触块。最大工作电压Ue触点额定值AC 600使用类别IEC NEMA额定工作电流电压Ue制造→] [← 打破←] [→ AC-15 A600 120-600 72-120 24-72 7200VA 60A 720VA 720VA 10A 28-600 24-28➀ 69VA 25A DC 600 DC-13 Q600微型块单电路与浅接触块的电气额定值相同，但尺寸较小（7/8“vs.11/8”深）。请参阅上面的浅接触块额定值表。PenTUFF块与浅接触块尺寸相同直接驱动五叉扳手提高接触可靠性和减少接触弹跳是低压应用的理想选择接触额定值最大工作电压Ue利用类别IEC NEMA额定工作电流电压Ue制造→] [← 打破←] [→ 120-300 0-120 1800VA 15A 180VA 1.5A 24-150 0-24 28VA 1.0A DC 150 DC-I3 R150 AC 300 AC-I5 C300触点块说明公告800T油密选择开关产品数据5逻辑簧片块与浅触点块尺寸相同设计用于逻辑电平切换低弹跳时间通常小于0.5毫秒镀贵金属簧片触点密封在玻璃外壳中填充惰性气体触点额定值最大值：150VAC、0.15A、8VA和30VDC、0.06A、1.8VA。
只能与电阻负载一起使用。密封开关块触点密封在一个装有惰性气体的玻璃外壳中，该玻璃外壳已通过UL认证，适用于I级和II级，2区/2区危险场所在污染环境中提供长接触寿命触点额定值最大工作电压Ue利用类别IEC NEMA额定工作电流电压Ue制造→] [← 打破←] [→ 120-600 0-120 3600VA 30A 360VA 3A 24-300 0-24 138VA 5A DC 300 DC-13 P300 AC 600 AC-15 B600可堆叠式密封开关块与密封开关块的功能相同，但可堆叠多达8个电路IP2X手指安全设计触点额定值最大持续电流Ith 2.5A。接触块说明（续）公告800T油密选择开关产品数据6不同类型接触块的安装深度如下所示：一组两组注-尺寸单位为英寸（毫米）。一个浅层、逻辑簧片或PenTUFF&一个小型块堆叠两个浅层，逻辑簧片或PenTUFF块堆叠一个浅、逻辑簧片和PenTUFF块注-浅层，PenTUFF，逻辑簧片和可堆叠密封开关块可以堆叠两个最大深度，并安装一个最大深度1-7/8（47.6）3（76.2）2-3/4（69.9）2-3/4，一个可堆叠或两个可堆叠的密封开关块触点浅块微型块PenTUFF（低压）块逻辑簧片块可堆叠密封开关块密封开关块接触
Traditional and Modular Catalog Number (continued) Bulletin 800T Oil tight Selector Switch Product Data 4 The following is a description of all different types of contact blocks: shallow bulletin 800H and 800T equipment standard one or two circuit contact blocks have a variety of single circuit and dual circuit contact blocks to directly drive the fork wrench; For applications below 24V and 24mA, it is recommended to use logical reed or five fork contact blocks. Maximum operating voltage Ue Contact rating AC 600 Use category IEC NEMA rated operating current Voltage Ue Manufacturing →] [← Breaking ←] [→ AC-15 A600 120-600 72-120 24-72 7200VA 60A 720VA 720VA 10A 28-600 24-28 ➀ 69VA 25A DC 600 DC-13 Q600 Miniature block Single circuit has the same electrical rating as the shallow contact block, but the size is smaller (7/8 "vs.11/8" deep) 。 Refer to the shallow contact block rating table above. The PenTUFF block is the same size as the shallow contact block. The five prong wrench is driven directly to improve contact reliability and reduce contact bounce. It is an ideal choice for low-voltage applications. The contact rating is the maximum working voltage Ue. It is made by using the IEC NEMA rated working current voltage Ue →] [← breaking ←] [→ 120-300 0-120 1800VA 15A 180VA 1.5A 24-150 0-24 28VA 1.0A DC 150 DC-I3 R150 AC 300 AC-I5 C300 Contact Block Description Bulletin 800T oil tight selector switch Product data 5 Logic reed block is the same size as the shallow contact block. It is designed for logic level switching. The low bounce time is usually less than 0.5ms. Precious metal reed contacts are sealed in the glass case. Inert gas is filled. The maximum contact rating is 150VAC, 0.15A, 8VA and 30VDC, 0.06A, 1.8VA 。
Use only with resistive loads. Sealed switch block contacts are enclosed in a glass enclosure containing inert gas, which is UL approved for Class I and Class II, Zone 2/Zone 2 hazardous areas provide long contact life in polluted environments Contact rating Maximum operating voltage Ue Manufactured using IEC NEMA rated operating current voltage Ue →] [← Break ←] [→ 120-600 0-120 3600VA 30A 360VA 3A 24-300 0-24 138VA 5A DC 300 DC-13 P300 AC 600 AC-15 B600 Stackable sealed switch block has the same function as the sealed switch block, but can stack up to 8 circuits IP2X finger safe design contact rating Maximum continuous current Ith 2.5A. Contact block description (continued) Bulletin 800T oil tight selector switch Product data 6 The installation depths of different types of contact blocks are as follows: one group and two groups Note - the dimensions are in inches (mm). One shallow layer, logic reed or PenTUFF&one small block stacks two shallow layers, logic reed or PenTUFF blocks stacks one shallow layer, logic reed and PenTUFF blocks Note - shallow layer, PenTUFF, logic reed and stackable sealing switch blocks can stack two maximum depths, and install a maximum depth of 1-7/8 (47.6) 3 (76.2) 2-3/4 (69.9) 2-3/4, One stackable or two stackable sealed switch block contacts Shallow block Miniature block PenTUFF (low voltage) block Logic reed block Stackable sealed switch block Sealed switch block contacts
