MVME761-001处理器模块
另请参阅：什么是参数和信号什么是参数文件如何保存参数如何比较参数打开参数文件关闭参数文件12.如何打印参数自DriveWindow 2.20版以来，可以打印驱动器的参数并打开参数文件。请注意，参数的打印是在Internet Explorer版本6（或更高版本）组件的帮助下完成的。如果没有安装正确的组件，参数打印命令将被禁用（灰色）。但是，可以将DriveWindow配置为“打印”到文件中。生成的XML文件可以稍后在DriveWindow能够打印的另一台计算机上打印。由于Internet Explorer用于打印参数，其设置也会影响DriveWindow打印。请注意，出于安全原因，在控制某些驱动器时，不能打印任何驱动器的参数。菜单中的命令被禁用（灰色）。参数、信号和故障4-114驱动器窗口2注意，也可以打印项目集，而不是打印驱动器参数或打开参数文件。可以打印以下内容：•打开参数文件中的参数。•选定驱动器中的参数。•所有驱动器的参数。•“参数比较”对话框中显示的参数差异。然而，并非打印驱动器或参数文件的所有参数和信号。不打印密码保护下的参数和信号。关于驱动器参数以外的其他项目，仅包括“应用程序属性”和“驱动器属性”，不包括子分支。打开的参数文件中的参数（在保存驱动器期间受密码保护）也不包括在内。请注意，驱动器属性的名称项打印到驱动器的标题部分。12.1.1配置打印格式在“桌面首选项”中选择“使用面板格式”（如果可用）也会影响打印参数值的格式，而不是参数差异。请注意，操作员面板格式仅适用于新驱动器。因此，选择仅涉及这些驱动器。Internet Explorer组件使用Internet Explorer的大多数主要设置。例如，使用了大多数页面设置设置。但是，不使用“方向”设置。您需要在“打印”对话框的“首选项”中进行设置。我们建议在Internet Explorer的“高级Internet选项”的“打印”部分选择“打印背景色和图像”。您可以在Internet Explorer的“工具”菜单中找到“Internet选项”。参数、信号和故障驱动窗口2 4-115 12.1.2要在打开的参数文件中打印参数，请在浏览树窗格中，用鼠标右键单击打开的参数（或其中的子分支），然后在上下文菜单的“参数”子菜单中选择“打印”命令
See Also: What are Parameters and Signals What is Parameter File How to Save Parameters How to Compare Parameters Opening a Parameter File Closing a Parameter File 12. How to Print Parameters Since version 2.20 of DriveWindow it is possible to print parameters of drives and open parameter files. Note that printing of parameters is done with help of Internet Explorer version 6 (or newer) components. If you do not have proper components installed, parameter printing commands are disabled (grayed). However, it is possible to configure DriveWindow to “print” into a file. The generated XML-file can be printed later in another computer, in which DriveWindow is capable to print. Because Internet Explorer is used in printing of parameters, its settings affect DriveWindow printing, too. Note that for safety reasons you cannot print parameters of any drive while control of some drive is taken. The commands in the menus are disabled (grayed). Parameters, Signals, and Faults 4-114 DriveWindow 2 Note that instead of printing of parameters of drives or open parameter files, it is also possible to print item sets. The following can be printed: • Parameters in an open parameter file. • Parameters in a selected drive. • Parameters of all drives. • Parameter differences shown in a Parameter Comparison dialog box. Not all parameters and signals of a drive or a parameter file are printed, however. Parameters and signals under pass code protection are not printed. About other items than drive parameters, only Application Properties and drive Properties without sub-branches are included. The parameters in an open parameter file, which were under pass code protection during saving the drive, are not included, either. Note that the Name item of drive Properties is printed into the title part of a drive. 12.1.1 Configuring printing format The selection of Use Panel Format (if available) in Desktop Preferences affects also the format of the printed parameter values other than parameter differences. Note that the operator panel format is only available in new drives. Thus the selection concerns only those drives. The Internet Explorer component uses most of the prevailing settings of Internet Explorer. For example, most of Page Setup settings are used. The Orientation setting is not used, however. You need to set it in Preferences of the Print dialog. We recommend that “Print background colors and images” is selected in Printing part of the Advanced Internet Options in Internet Explorer. You can find Internet Options in the Tools menu of Internet Explorer. Parameters, Signals, and Faults DriveWindow 2 4-115 12.1.2 To print parameters in an open parameter file In the browse tree pane, click with the right mouse button the open parameter file (or a sub-branch within it) and then select the Print command in the Parameters submenu of the context menu
