MVME854TK备件库存
通常单击“是”。如果您熟悉驱动器并想节省几分钟的时间，您可以通过单击“否”来跳过强制。参数、信号和故障DriveWindow 2 4-111如果您要求DriveWindow请求驱动器将参数强制写入闪存，光标将变为沙漏，状态栏将通知您写入闪存。如果由于某种原因强制失败，DriveWindow会通知您。如果愿意，您可以选择重试强制。请注意，如果您请求强制，但失败，DriveWindow不会询问您有关重新启动驱动器的问题。如果要在这种情况下重新启动驱动器，我们建议您退出DriveWindow，或断开节点地址1处的驱动器或要重新启动的驱动器与DDCS网络的连接。然后通过关闭/打开电源手动重新启动驱动器。通过拖放还原通过将参数文件从Windows资源管理器中拖放到驱动器中，从参数文件中还原参数：•确保您有可用的驱动器的完整备份。恢复参数时，如果出现问题，可能需要备份。•如果驱动器包含应用程序宏，请验证所选宏在文件和驱动器中是否相同。•如果任何参数受到参数锁的写保护，请打开锁并重新连接DriveWindow。•在Windows资源管理器中，浏览参数文件。•在DriveWindow的浏览树窗格中，单击参数文件并用鼠标将其向下拖动到驱动器（或其中的子分支）上。•释放鼠标按钮，删除参数文件。参数、信号和故障DriveWindow 2 4-109•DriveWindow要求您确认。单击“是”按钮。11.1.5版本检查DriveWindow首先检查版本兼容性。如果在“属性”、“应用程序属性”或某些驱动器类型相关参数中发现任何差异，将显示一个消息框。它会警告您版本不兼容的后果，并允许您通过回答第11.1.6号“恢复类型选择”来取消下载。如果版本匹配，或者如果您决定继续进行版本冲突，将显示“选择恢复类型”对话框。注意，DriveWindow无法处理本地DriveDA OPC服务器驱动器（AC880系列）的ID运行结果参数。相反，所有参数都会恢复，这在大多数情况下都会失败。因此，我们不建议使用DriveWindow恢复ACS880系列驱动器的参数。没有为ACS880系列驱动器显示“选择还原类型”对话框。现在是时候决定是否要下载用户参数、ID运行结果参数或两者。您可以通过单击对话框“参数、信号和故障4-110 DriveWindow 2”中的相应检查字段来进行选择。请注意，如果参数文件不包含所有ID运行结果参数（您可能删除了其中的一些），则相应的检查字段将被禁用（灰色）。完成选择后，单击“确定”按钮。您还可以通过单击“取消”按钮取消下载。请注意，如果两个复选框都未选中，则“确定”按钮不接受鼠标单击。11.1.7确认最后，要求确认。单击是继续，单击否取消下载。11.1.8下载下载参数需要一段时间。光标转到沙漏，状态栏通知您下载。下载参数后，系统会询问您是否将其强制写入闪存。强制确保即使驱动器立即重新启动，下载的参数仍然有效。
Typically you click Yes. If you know your drive well and want to save a few minutes of your time, you can skip forcing by clicking No. Parameters, Signals, and Faults DriveWindow 2 4-111 If you asked DriveWindow to request the drive to force the parameters into the FLASH memory, the cursor stays turned to hour-glass and the status bar informs you about writing to FLASH memory. If forcing for some reason fails, DriveWindow informs you about it. You have then the option to retry forcing if you wish. Note that if you have requested forcing and it fails, DriveWindow does not ask you about restarting the drive. If you want to restart the drive in such a case, we recommend that you either exit from DriveWindow, or disconnect the drive at node address one, or the drive to be restarted, from the DDCS network. Then restart the drive manually by power off/on.Restoring by Drag and Drop To restore the parameters from a parameter file by dragging it from Windows Explorer and dropping it into a drive: • Make sure, you have a full backup of the drive(s) available. The backup may be required, if something goes wrong, when restoring the parameters. • If drive contains application macros, verify that the selected macro is the same in the file and in the drive. • If any of the parameters is write protected by a parameter lock, open the lock and reconnect DriveWindow. • In Windows Explorer, browse the parameter file. • Click the parameter file and drag it with the mouse button down upon the drive (or a subbranch within it) in the browse tree pane of DriveWindow. • Drop the parameter file by releasing the mouse button. Parameters, Signals, and Faults DriveWindow 2 4-109 • DriveWindow requests your confirmation. Click the Yes button. 11.1.5 Version Check DriveWindow first checks version compatibility. If any differences are found in Properties, Application Properties, or in some, drive kind dependent parameters, a message box is presented. It warns you about consequences of version incompatibilities and allows you to cancel downloading by answering No. 11.1.6 Restore Type Selection If the versions match, or if you decided to proceed with version conflicts, a Select Restore Type dialog box is presented. Note that DriveWindow is not able to handle ID run result parameters of native DriveDA OPC server drives (AC880 family). Instead, all parameters are restored, which in most cases fails. Thus we do not recommend using DriveWindow to restore parameters of ACS880 family of drives. No Select Restore Type dialog box is presented for ACS880 family of drives. Now it is time to decide, whether you want to download user parameters, ID run result parameters, or both. You do the selection by clicking the proper check fields in the dialog box Parameters, Signals, and Faults 4-110 DriveWindow 2 Note that if the parameter file does not contain all ID run result parameters (you have possibly deleted some of them), the corresponding check field is disabled (grayed). When you have done your selection, click the OK button. You have also the option to cancel downloading by clicking the Cancel button. Note that the OK button does not accept mouse clicks if neither of the check fields is selected. 11.1.7 Confirmation Finally, a confirmation is requested. Click Yes to continue, click No to cancel downloading. 11.1.8 Downloading Downloading of the parameters takes for a while. The cursor turns to hour-glass and the status bar informs you about downloading. After parameters have been downloaded, you are requested, whether to force them into the FLASH memory or not. Forcing guarantees that the downloaded parameters persist even if the drive is promptly restarted.
