NU8976a HIER466665R99自动化模块备件
仅当选择“固定点”或“指数”格式时才启用该选项。查看参数和信号中解释了不同格式的详细描述，即如何以不同格式显示值。通常，属性使用默认值。另请参阅：更改模板属性项目集格式属性桌面首选项9.3.5模板项目属性“项目”选项卡定义了模板定义的项目名称的形成方式以及项目不可用时的显示方式。请注意，当在用户项目集视图中显示模板而不是项目时，属性无效。项目名称允许您指定项目集窗格的名称列中项目名称的显示方式。•默认值表示项目将使用项目集属性中的项目名称设置。•固定表示要使用模板的Name属性。•从驱动器获取意味着要从驱动器读取项目的名称。从驱动器中读取项目名称可能并不总是可能的。如果名称不可用，DriveWindow将使用项目的OPC地址作为其名称。参数、信号和故障4-98 DriveWindow 2通常属性使用默认值。N/A项允许您指定如何显示该项（如果该项在当前源驱动器中不可用）。•默认值表示项目集属性中的N/A项目设置将用于该项目。•隐藏意味着在项目不可用的情况下根本不显示该项目。•显示意味着如果项目不可用，则显示该项目，但其值将显示为。•显示为模板意味着如果该项目不可用则显示模板。请注意，N/A项目不影响项目的显示（如果可用）。通常，属性使用默认值。另请参阅：更改模板属性项目集项目属性桌面首选项10.如何使用DriveWindow保存参数可以将驱动器的用户和ID运行结果参数保存到文件中。如果需要，可以编辑保存的参数。注意，DriveWindow无法处理本地DriveDA OPC服务器驱动器（AC880系列）的ID运行结果参数。而是保存所有未隐藏的参数。请注意，出于安全原因，在控制某些驱动器时，不能保存任何驱动器的参数。菜单中的命令已禁用（灰色）。您可以使用保存的参数：•恢复用户和/或ID运行结果参数（例如，在系统软件版本升级后）。•与驱动器中的当前参数或其他参数文件进行比较。•导出方式与导出驱动器参数的方式相同。注意，除了读/写参数之外，还保存了有关信号（只读）和仅写参数的信息。然而，并非驱动器的所有参数都被保存。除了在保存时不受密码保护的组外，还有下载过程中需要的参数、应用程序属性和没有子分支的驱动器属性。请注意，您不需要决定是否需要保存的参数来恢复用户或ID运行结果参数。你在恢复时间做出决定。要保存驱动器的参数，请在浏览树窗格中用鼠标右键单击驱动器（或其中的子分支），然后从关联菜单的“参数”子菜单中选择“另存为”命令。
It is enabled only when Fixed point or Exponent format is selected. The detailed description of different formats, i.e., how values are displayed in different formats, is explained in Viewing Parameters and Signals. Typically the value Default is used for the property. See Also: Changing Template Properties Item Set Format Properties Desktop Preferences 9.3.5 Template Items Properties The Items tab defines, how the name of the item defined by the template is formed and what is displayed in case the item is not available.. Note that the properties have no effect when templates are shown instead of items in the user item set view. Item Names allows you to specify, how the name of the item in the Name column of the item sets pane is to be displayed. • Default means that the Item Names setting in Item Set Properties is to be used for the item. • Fixed means that the Name property of the template is to be used. • Fetch from Drive means that the name of the item is to be read from the drive. Reading the name of an item from the drive may not always be possible. If the name is not available, DriveWindow uses the OPC Address of the item as its name. Parameters, Signals, and Faults 4-98 DriveWindow 2 Typically the value Default is used for the property. N/A Items allows you to specify, how to display the item, if it is not available in the current source drive. • Default means that the N/A Items setting in Item Set Properties is to be used for the item. • Hide means that the item is not shown at all in case it is not available. • Show means that the item is shown, if it is not available, but its value is to be shown as . • Show as Template means that the template is shown if the item is not available. Note that the N/A Items does not affect displaying of the item, if it is available. Typically the value Default is used for the property. See Also: Changing Template Properties Item Set Items Properties Desktop Preferences 10. How to Save Parameters With DriveWindow it is possible to save user and ID run result parameters of a drive into a file. The saved parameters can be edited, if required. Note that DriveWindow is not able to handle ID run result parameters of native DriveDA OPC server drives (AC880 family). Instead, all unhidden parameters are saved. Note that for safety reasons you cannot save parameters of any drive while control of some drive is taken. The command in the menu is disabled (grayed). You can use the saved parameters in: • Restoring user and/or ID run result parameters (after a system software version upgrade, for example). • Comparing with current parameters in a drive or with another parameter file. • Exporting the same way as parameters of a drive are exported. Note that in addition of read/write parameters, information about signals (read-only) and write-only parameters are saved, too. Not all parameters of a drive are saved, however. In addition of groups, which are not under pass code protection at save time, there are also parameters required during download, Application Properties, and drive Properties without sub-branches. Note that you need not to decide, whether you need the saved parameters to restore user or ID run result parameters. You make the decision at restoring time. To save parameters of a drive, click with the right mouse button the drive (or a sub-branch within it) in the browse tree pane and then select the Save As command from the Parameters submenu of the context menu.
