P0922YH FBM201b工控模块机器人备件
因此这里不再重复添加和删除的细节。添加、删除或更改模板的属性被认为是工作空间中的一项主要更改。这意味着DriveWindow将通知您操作中未保存的工作区更改，这些更改会导致当前正在使用的工作区被破坏。9.1.1添加模板可以通过三种方法添加到用户项目集：•通过拖放项目或模板进行复制•通过从剪贴板粘贴项目或模板来复制•使用添加新项目命令通过复制添加的模板将其所有属性设置为使用默认值，即使用项目集定义的相应属性值。在这种情况下，如果需要，必须单独更改模板属性值。请注意，一次可以复制多个项目或模板。参数、信号和故障4-86驱动窗口2当在显示用户项目集时选择添加新项目命令时，将添加模板而不是项目。上下文菜单中包含相同的命令，您可以通过在项目名称外的项目集窗格上单击鼠标右键来获得该命令。通过此方法添加模板时，将显示“添加新模板”对话框，而不是“将项目添加到桌面”对话框，如果已显示浏览的项目集，则会显示该对话框。该对话框允许您查看和设置要添加的模板的属性。该对话框实际上与“模板属性”对话框相同，只是标题不同。稍后也可以查看和更改属性。参数、信号和故障DriveWindow 2 4-87注意，DriveWindow会记住大多数属性的最新更改，并在添加模板时提出建议。这意味着在添加模板时应始终仔细检查所有属性。还要注意，DriveWindow不会检查模板的ItemId属性的正确性。如果出现错误，则意味着模板定义的项永远不可用。由于DriveWindow为模板定义的项目生成OPC地址的通道和节点号部分，因此无法在用户项目集中使用特殊项目，因为这两个项目都没有。9.1.2删除模板的方式与从浏览或所有参数项目集中删除项目的方式相同。但是，由于所选模板被永久删除，因此在这种情况下，DriveWindow会要求您确认删除。另请参阅：使用模板更改模板属性从剪贴板粘贴项目拖放项目参数、信号和故障4-88 DriveWindow 2 9.2查看模板通常您希望查看用户项目集中模板定义的项目。但是，有时您可能希望看到模板。例如，为了能够更改模板属性，必须使模板可见。9.2.1模板要查看模板而不是项目，请在显示用户项目集时从“视图”菜单中选择“模板”命令。上下文菜单中包含相同的命令，您可以通过在项目名称外的项目集窗格上单击鼠标右键来获得该命令。请注意，如果菜单中已显示模板而不是项目，则“模板”命令将被“项目”命令替换。9.2.2项目要查看项目而不是模板，请在显示用户项目集时从“视图”菜单中选择“项目”命令。参数、信号和故障驱动窗口2 4-89上下文菜单中包含相同的命令，您可以通过在项目名称外的项目集窗格上单击鼠标右键获得该命令。请注意，如果菜单中已显示项目而不是模板，则“项目”命令将替换为“模板”命令。9.2.3解释用户项目集中显示的模板外观与项目外观相似。但是，模板显示了模板的一些属性。Name字段的内容取决于模板的Item Names属性的值。•如果项目名称的值为“从驱动器获取”（如果可用），则与OPC地址字段相同。•如果Item Names的值为Fixed，则包含模板的Name属性。•如果Item Names的值为Default，则它包含上述两个值，并用斜线分隔。
details of adding and deleting are thus not repeated here. Adding, deleting, or changing properties of templates is considered to be a major change in the workspace. It means that DriveWindow will notify you about unsaved workspace changes in operations that cause the workspace currently in use to be destroyed. 9.1.1 Adding Templates can be added into a user item set by three methods: • Copying by dragging and dropping items or templates • Copying by pasting items or templates from the clipboard • Using Add New Item command Templates added by copying have all their properties set to use defaults, i.e., corresponding property values defined by the item set are in use. In this case you have to change the template property values separately if needed. Note that you can copy more than one item or template at a time. Parameters, Signals, and Faults 4-86 DriveWindow 2 When the Add New Item command is selected while a user item set is displaying, a template will be added instead of an item. The same command is included in the context menu, which you get by clicking with the right mouse button on the item sets pane outside the name of an item. When you add a template by this method, an Add New Template dialog is shown instead of the Add Item to Desktop dialog, which would have been shown, if the browsed item set had been displayed. The dialog allows you to view and set properties of the template to be added. The dialog box is actually the same as Template Properties dialog box - only the title differs. The properties can be viewed and changed also later. Parameters, Signals, and Faults DriveWindow 2 4-87 Note that DriveWindow remembers the latest changes of most properties and suggests them when adding a template. It means that you should always check carefully all the properties when adding a template. Note also that DriveWindow does not check the correctness of the ItemId property of the template. If there is an error, it just means that the item defined by the template is never available. Because DriveWindow generates the channel and node number parts of the OPC Address for the item defined by a template, it is not possible to use in user item sets special items, which do not have both of them. 9.1.2 Deleting Templates are deleted the same way as items from the browse or all parameters item set. However, because the selected templates are deleted permanently, DriveWindow asks you to confirm the deletion in this case. See Also: Using Templates Changing Template Properties Pasting Items from the Clipboard Dragging and Dropping Items Parameters, Signals, and Faults 4-88 DriveWindow 2 9.2 Viewing Templates Normally you want to see the items defined by the templates in a user item set. However, occasionally you may want to see the templates instead. For example, to be able to change template properties you must have the template visible. 9.2.1 Templates To see templates instead of items, select the Templates command from the View menu while a user item set is displaying. The same command is included in the context menu, which you get by clicking with the right mouse button on the item sets pane outside the name of an item. Note that the Templates command is replaced by Items command in the menus if you already have templates visible instead of items. 9.2.2 Items To see items instead of templates, select the Items command from the View menu while a user item set is displaying. Parameters, Signals, and Faults DriveWindow 2 4-89 The same command is included in the context menu, which you get by clicking with the right mouse button on the item sets pane outside the name of an item. Note that the Items command is replaced by Templates command in the menus if you already have items visible instead of templates. 9.2.3 Interpretation The outlook of a template as shown in a user item set resembles the outlook of an item. However, the template displays some of the properties of the template. Content of the Name field depends on the value of the Item Names property of the template. • It is the same as the OPC Address field if Item Names has value Fetch from Drive (if available). • It contains the Name property of the template if Item Names has value Fixed. • It contains both the values mentioned above separated by a slash if Item Names has value Default.
