PFCL201CE 3BSX646434-108 DCS工控模块备件
端子位于3或4极断路器的顶部或底部。1 x 0.75–2.5 mm²（18–14 AWG）或2 x 0.75–1.5 mm²（18-14 AWG）铜导线的标准控制电路端子。安装在开关外壳外部。与柔性和高柔性导体套圈一起使用。仅当绞合且无套圈时，才能连接最大指定横截面。必须安装NZM1（-4）-XKSA盖（提供）。NZM1-XKSA 1个260021 NZM1-4-XKSA 1个266741型包含位于3或4极断路器顶部或底部的端子零件。使用电缆接线片、母线或隧道端子时，防止直接接触。包含在带有隧道端子或螺纹连接端子的套件中。使用绝缘导体材料时，连接侧的防护等级为IP1X。16连接类型订购LZM2 EATON CORPORATION CA012002EN 20.5 15 18最大电缆连接用于端子容量端子容量区域端子铜带类型（导体电容数量1）段x宽度x段厚度）mm²AWG/kcmil mm隧道端子LZM2（-4）3极铜电缆1 x 16…1851）1 x 6–350 LN2根据电缆制造商的不同，最多可连接240 mm²。接线盒LZM2（-4）3极铜1 x 4–185 1 x 11–350≥ 2 x 9 x 0.8 LN2（-4）导线2 x 4–70 2 x 12–2/0铜电缆4极盖–LZM2 3极–LZM2（-4）4极LN2-4铜电缆接线片当使用不带NZM3（-4）XKSA盖的电缆接线片时，它们必须绝缘。95 mm²LZM2（-4）3和LN2（-4）4极120 mm²150 mm²185 mm²连接类型17订购LZM2伊顿公司CA012002EN NZM2-160-XKC 1 off 262240 NZM2-250-XKC 262244 NZM2-4-160-XKC 266755 NZM2-4-250-XKC 266零件号。订购时，铜母线产品编号见价格标准包装注释宽度x单独列出厚度mm NZM2-XKA 1个271457 NZM2-4-XKA 1个271458类型后缀和类型包含3或4极断路器顶部或底部断路器侧的零件。带螺纹连接的断路器转换套件。安装在开关外壳内。O=顶部安装U=底部安装Ue≥ 525 V AC：使用盖子NZM2（4）-XKSA。使用具有柔性和高度柔性导体的套圈。所示的最大横截面只能在柔性且无套圈的情况下连接。类型包含3或4极断路器顶部或底部端子的零件。1 x 0.75–2.5 mm²（18–14 AWG）或2 x 0.75–1.5 mm²（18-16 AWG）铜导线的标准控制电路端子。安装在开关外壳外部。与柔性和高柔性导体套圈一起使用。仅当绞合且无套圈时，才能连接最大指定横截面。必须安装NZM2（-4）-XKSA盖（提供）。类型包含3或4极断路器顶部或底部端子的零件。使用电缆接线片、母线或隧道端子时，防止直接接触。使用绝缘导体材料时，连接侧的防护等级为IP1X。类型包含三极或四极开关的电缆接线片。特殊电缆接线片，窄型。NZM2-XKSA 1个260038 NZM2-4-XKSA 1个266770 KS95-NZM7 3个059775 KS120-NZM77 059776 KS150-NZM7 059777 NZM2-XKS 185 260032 18连接类型订购LZM3 EATON CORPORATION CA012002EN 16 25接线盒最大500 LZM3（-4）3极铜1 x 35–240 1 x 2–350 LN3（-4）导线2 x 16–120铜电缆630 4极最大电缆连接额定用于终端容量区域电流1）端子导体容量类型I n A mm²AWG/kcmil连接宽度扩展630 LZM3（-4）3极铜2 x 300 2 x 500 LN3（-4）电缆1 x 600接线片4极22.5 20.5隧道端子最大350 LZM3（-3）3极铜片1 x 16–1852）1 x 6–350 LN3（-4）导体铜电缆4极导体铝电缆最大630 3极1 x 50–240 1 x 0–500 2 x 50–2402 x 0–5004极注1）以下适用于额定电流：所确定的值符合IEC/EN 60947（开关设备标准），通常与最大定义横截面相关，用于定向。必须遵守适用于每种情况的工程标准。2） 根据电缆制造商的不同，最多可连接240mm²。连接类型19订购LZM3伊顿公司CA012002EN最小6 x 16 x 0.8 NZM3-XKC 1个最大20 x 24 x 0.5 260042或最大11 x 21 x 1 NZM3-4-XKC 266783端子
terminal located at top or bottom for 3 or 4-pole circuit-breakers. A standard with control circuit terminal for 1 x 0.75 – 2.5 mm² (18 – 14 AWG) or 2 x 0.75 – 1.5 mm² (18 – 14 AWG) copper conductors. Fitted outside the switch housing. Use with flexible and highly flexible conductors ferrules. Maximum specified cross-section can only be connected when stranded and without ferrules. Mounting of the cover NZM1(-4)-XKSA obligatory (supplied). NZM1-XKSA 1 off 260021 NZM1-4-XKSA 1 off 266741 Type contains parts for a terminal located at top or bottom for 3 or 4-pole circuit-breakers. Protection against direct contact where cable lugs, busbars or tunnel terminals are used. Contained in kit with tunnel terminals or screw connection terminals. Degree of protection IP1X on the connection side when using insulated conductor material. 16 Connection types Ordering LZM2 EATON CORPORATION CA012002EN 20.5 15 18 Max. cable connection For use with Terminal capacities Terminal capacities area Type of Terminal Cu strip (number of conductor capacities1) segments x width x segment thickness) mm² AWG/kcmil mm Tunnel terminal LZM2(-4) 3pole Copper cable 1 x 16 ... 1851) 1 x 6 – 350 LN2(-4) all cable 1 x 16 ... 1851) – 4pole Notes 1) Up to 240 mm² can be connected depending on the cable manufacturer. Box terminal LZM2(-4) 3pole Copper 1 x 4 – 185 1 x 11 – 350 ≥ 2 x 9 x 0.8 LN2(-4) conductors 2 x 4 – 70 2 x 12 – 2/0 Cu cable 4pole Cover – LZM2 3 pole – LZM2(-4) 4 pole LN2-4 Copper cable lug When using cable lugs without NZM3(-4)-XKSA cover, they must be insulated. 95 mm² LZM2(-4) 3 and LN2(-4) 4 pole 120 mm² 150 mm² 185 mm² Connection types 17 Ordering LZM2 EATON CORPORATION CA012002EN NZM2-160-XKC 1 off 262240 NZM2-250-XKC 262244 NZM2-4-160-XKC 266755 NZM2-4-250-XKC 266756 Part no. Price Copper busbar Article no. when ordered see price Std. pack Notes width x separately list thickness mm NZM2-XKA 1 off 271457 NZM2-4-XKA 1 off 271458 Type suffix and type contain parts for a circuit-breaker side at top or bottom for 3 or 4 pole circuitbreakers. Conversion kit for circuit-breaker with screw connection. Fitted within the switch housing. O = for fitting at the top U = for fitting at the bottom Ue ≥ 525 V AC: Use cover NZM2(4)-XKSA. Use ferrules with flexible and highly flexible conductors. Max. cross section shown can only be connected when flexible and without ferrules. Type contains parts for a terminal located at top or bottom for 3 or 4-pole circuit-breakers. A standard with control circuit terminal for 1 x 0.75 – 2.5 mm² (18 – 14 AWG) or 2 x 0.75 – 1.5 mm² (18 – 16 AWG) copper conductors. Fitted outside the switch housing. Use with flexible and highly flexible conductors ferrules. Maximum specified cross-section can only be connected when stranded and without ferrules. Mounting of the cover NZM2(-4)-XKSA obligatory (supplied). Type contains parts for a terminal located at top or bottom for 3 or 4-pole circuit-breakers. Protection against direct contact where cable lugs, busbars or tunnel terminals are used. Degree of protection IP1X on the connection side when using insulated conductor material. Type contains a cable lug for 3-pole or 4-pole switches. Special cable lug, narrow style. NZM2-XKSA 1 off 260038 NZM2-4-XKSA 1 off 266770 KS95-NZM7 3 off 059775 KS120-NZM7 059776 KS150-NZM7 059777 NZM2-XKS185 260032 18 Connection types Ordering LZM3 EATON CORPORATION CA012002EN 16 25 Box terminal max. 500 LZM3(-4) 3pole Copper 1 x 35 – 240 1 x 2 – 350 LN3(-4) conductors 2 x 16 – 120 Cu cable 630 4pole Max. cable connection Rated For use with Terminal capacities area current1) Type of Terminal conductor capacities I n A mm² AWG/kcmil Connection width extension 630 LZM3(-4) 3pole Copper 2 x 300 2 x 500 LN3(-4) cable 1 x 600 lugs 4pole 22.5 20.5 Tunnel terminal max. 350 LZM3(-4) 3pole Copper 1 x 16 – 1852) 1 x 6 – 350 LN3(-4) conductors Cu cable 4pole conductors Al cable max. 630 3pole 1 x 50 – 240 1 x 0 – 500 2 x 50 – 240 2 x 0 – 500 4pole Notes 1) The following applies for the rated current: The values have been determined conform to IEC/EN 60947 (switchgear standard) and generally relate to the max. defined cross-sections and are intended for the purpose of orientation. The engineering standards which apply in each case must be observed. 2) Up to 240mm² can be connected depending on the cable manufacturer. Connection types 19 Ordering LZM3 EATON CORPORATION CA012002EN min. 6 x 16 x 0.8 NZM3-XKC 1 off max. 20 x 24 x 0.5 260042 or max. 11 x 21 x 1 NZM3-4-XKC 266783 Terminal
