PP865 3BSE042236R1工控模块系统备件
其设计用于检测其传感表面上的人的存在。MatGuard安全垫有两块导电硬化钢板，由不导电的可压缩隔板隔开。每个仅在24V DC下工作的四线垫都预先布线并与其他垫串联，以形成危险区域的地面防护系统。通过垫子的电路必须由安全等级控制单元监控，该控制单元可以是Minotaur安全继电器、MatGuard控制单元或MatGuard垫子管理器。当垫子清洁时，控制单元向机器控制电路提供信号。当垫被踩下时，导电板接触，电路中的电阻降为零。这由控制单元监控，控制单元向机器发送停机信号。由于MatGuard安全垫是完全密封的（IP67），水、液体和冷却剂没有问题。此外，坚韧的乙烯基可以抵抗漂白、酸、盐和许多工业化学品。独特的成型工艺使垫子具有更长的使用寿命和可靠性。特点硬化钢板结构无死角4线系统，可检测开路和短路。可承受4500 psi IP67额定静压。规格标准EN1760-1、EN954-1、ISO 13849-1、IEC/EN660204-1、ANSI RIA R15.06、ANSI/B11.19、AS4024.5类别类别。符合EN954-1的1个装置，适用于Cat。3个系统认证CE标记，适用于所有适用指令，cULus认证，CSA Z432‐04和TÜV电源24V DC，-20%+10%，由控制单元提供连接线长度，最大200米（656英尺）电缆长度4.5米（15英尺）标准（见产品选择）检测重量最小30千克（66磅），80毫米（3.125英寸）。)直径为31034千帕（4500磅/平方英寸）的圆盘施加的最大压力区域尺寸为100平方米（1076平方英尺），最大机械寿命为10000000次操作操作温度[C（F）]-25…55°（-14…131°）相对湿度100%外壳类型等级IP67（NEMA 6P）振动5克，10…200赫兹冲击11毫秒10克/16毫秒10克端子保护IP 20 DIN 0470导线尺寸0.75 mm2（18 AWG），2线；3.8 mm x 7.4 mm（0.15 in.x 0.29 in.）护套外径重量10.9 kg/m2（2.2 lbs/ft2）材料Plasisol乙烯基颜色黄色或黑色饰件材料6063铝安装平面厚度16 mm（0.63 in.）
that is designed to detect the presence of people on its sensing surface. The MatGuard safety mat has two conductive hardened steel plates that are held apart by nonconductive compressible separators. Each four-wire mat, operating on only 24V DC, is pre-wired and connected in series with other mats to form a floor level guarding system for hazardous areas. The circuit through the mat must be monitored by a safety-rated control unit, which may be a Minotaur Safety Relay, MatGuard control unit, or MatGuard Mat Manager. When the mat is clear, the control unit provides a signal to the machine control circuit. When a mat is stepped on, the conductive plates touch and the resistance in the circuit falls to zero. This is monitored by the control unit, which sends a shutdown signal to the machine. Since the MatGuard safety mat is completely sealed (IP67), water, liquids and coolants present no problem. In addition, the tough vinyl will resist bleaches, acids, salts and many industrial chemicals. The unique molding process allows the long life and reliability of the mat. Features Hardened steel plate construction No dead spots 4-wire system to detect opens and shorts Can withstand a static pressure of 4500 psi IP67 rated Specifications Standards EN1760-1, EN954-1, ISO 13849-1, IEC/EN60204-1, ANSI RIA R15.06, ANSI/B11.19, AS4024.5 Category Cat. 1 device per EN954-1, suitable for Cat. 3 systems Certifications CE Marked for all applicable directives, cULus Listed, CSA Z432‐04, and TÜV Power Supply 24V DC, -20% +10%, provided by the control unit Connection Wire Length, Max. 200 m (656 ft) Cable Length 4.5 m (15 ft) standard (see Product Selection) Detection Weight 30 kg (66 lbs) minimum on an 80 mm (3.125 in.) diameter circular disk Maximum Pressure Applied to Mat 31,034 kPa (4500 psi) Zone Size 100 m2 (1076 ft2), maximum Mechanical Life 10,000,000 operations Operating Temperature [C (F)] ‐25…55° (‐14…131°) Relative Humidity 100% Enclosure Type Rating IP67 (NEMA 6P) Vibration 5 g, 10…200 Hz Shock 11 ms 10 g/16 ms 10 g Terminal Protection IP 20 DIN 0470 Wire Size 0.75 mm2 (18 AWG), 2 wire; 3.8 mm x 7.4 mm (0.15 in. x 0.29 in.) jacket OD Weight 10.9 kg/m2 (2.2lbs/ft2) Material Plastisol Vinyl Color Yellow or Black Trim Material 6063 Aluminum Mounting Flat surface Thickness 16 mm (0.63 in.)
