PPC380AE01 HIEE300885R0001输入输出模块
1.进行所需的任何其他测试，以确认安全相关控制系统符合EN 954-1规定的类别要求，并按预期工作。2.检查与受垫系统安装影响的机器电路相关的任何其他安全功能。这些测试应有现有程序。3.在电源处隔离机器电源。4.重新连接机器控制系统提供的任何自动复位功能。5.将机器原动机重新连接至最终接触器。6.固定所有盖子和门。6.6功能检查恢复机器电源。检查：-1。在重置垫子控制单元之前，机器无法开始操作。执行第8.2.2节所述的行走测试。检查垫子的启动是否停止危险移动。3.检查踏下垫子不会启动机器操作，但能够重新启动。4.检查以步行速度接近机器时，危险运动是否在到达危险区域之前停止。在关键应用中，应进行停机时间测试5。如果安装了任何类型的静音系统，请检查垫子系统是否仅在运行周期的非危险部分静音，以及任何静音指示器是否正常工作。6.测试机器的紧急停止功能。第7节-使用在将机器投入正常使用之前，确保操作员和主管了解垫子系统的性质和用途，并了解控制器和指示器的功能。确保技术规范以及检查、测试和维修说明可供相关人员使用，并且检查记录系统已到位。确保人员了解没有额外的覆盖物、木板
1. Carry out any other tests required to confirm that the safety related control system meets the requirements of its Category according to EN 954-1 and works as intended. 2. Check any other safety functions associated with the machine circuits which have been affected by the installation of the mat system. There should be an existing procedure for these tests. 3. ISOLATE THE MACHINE POWER SUPPLY AT SOURCE. 4. Reconnect any automatic reset function provided by the machine control system. 5. Reconnect the machine prime mover to the final contactors. 6. Secure all covers and doors. 6.6 FUNCTIONAL CHECKOUT Reinstate the machine electrical supply. Check:- 1. Machine operation cannot commence until the mat control unit has been reset. Perform the walking test described in section 8.2. 2. Check that actuation of the mat stops hazardous movement. 3. Check that stepping off the mat does not start machine operation but does enable restart. 4. Check that when approaching the machine at walking pace, hazardous movement stops before the hazard zone can be reached. In critical applications, stop-time tests should be carried out 5. If any type of muting system is installed, check that the mat system is muted only during non-hazardous parts of the operating cycle and that any mute indicators operate correctly. 6. Test the machine’s Emergency stop function. Section 7 - USE Prior to putting the machine into its normal service, ensure that operators and supervisors are aware of the nature and purpose of the mat system and that they understand the functions of the controls and indicators. Ensure that the technical specifications together with inspection, test and servicing instructions are available to the appropriate personnel and that a system for recording inspections is in place. ENSURE THAT PERSONNEL UNDERSTAND THAT NO ADDITIONAL COVERINGS, BOARDS
