KOLLMORGEN S20360-SRS 工控模块备件
由于正常使用，触点最终将开始恶化。定期检查这些触点应是任何驱动系统预防性维护计划的一部分。如果触点检查显示电源极触点严重腐蚀，建议更换电源极（如果可能）或接触器。更换接触器将有助于减少触点闭合不均匀和不均匀的影响。如果接触器长时间未使用，应在使用前对机械完整性和接触腐蚀进行简要检查！注意：要保持1370接触器的UL认证和CSA认证，您必须使用Thomas&Betts Corporation压缩工具TBM6或TBM6S，并遵循该工具提供的说明。压接不当会导致过热、火灾和/或人身伤害！注意：为了防止人身伤害，确保在工具手柄连接在一起时，手指远离模具巢。大多数压缩工具都设计有全行程强制机构，因此在初始闭合后很难松开手柄。操作前，请咨询制造商关于压缩工具的说明。接触器负载和线路端子动态制动端子螺钉/螺栓尺寸扭矩N-m（lb-in.）
As a result of normal use, the contacts will eventually begin to deteriorate. Periodic inspection of these contacts should be part of any drive system preventative maintenance program. If contact inspection reveals severe erosion on the power pole contacts, it is recommended that the power poles (if possible) or contactor be replaced. Replacing the contactor will help reduce the effects of uneven and unequal contact closings. If the contactor has not been used for an extended period of time, a brief inspection for mechanical integrity and contact corrosion should be made before use. ! ATTENTION: To maintain the UL listing and CSA certification on the 1370 contactor, you must use a Thomas & Betts Corporation Compression Tool TBM6 or TBM6S and follow the instructions provided with the tool. Improper crimping can result in overheating, fire and/or personal injury. ! ATTENTION: To guard against personal injury, ensure that fingers are kept clear of die nests whenever the tool handles are brought together. Most compression tools are designed with a full stroke compelling mechanism, thus making release of the handles difficult after initial closure. Consult the manufacturers instructions for your compression tool prior to operation. Contactor Load and Line Terminals Dynamic Braking Terminals Screw/Bolt Size Torque N-m (lb.-in.) Screw/Bolt Size Torque N-m (lb.-in.)
