EMERSON A6110 励磁系统控制卡
在以下新的或更新的信息中。此列表仅包含实质性更新,并非旨在反映所有更改。翻译版本并不总是适用于每个版本。说明45MLA光阵列控制器驱动光阵列中的光电元件,这基本上是一系列透射光束对。该控制器有五个版本,每个版本都提供不同的通信平台,可以选择与一系列可编程逻辑控制器(PLC)一起工作。控制器包括许多应用程序功能,允许对许多应用程序进行定制。例如,I/O模块可用于配置多达四个具有独立输出和悬垂/超高检测的独立感测区。基本模型具有用于离散应用的开/关输出。模拟输出模式提供与目标高度、宽度或位置成比例的4…20 mA电流或0…10V输出。网络通信模型(RS-485和CAN)可用于通信精确的高度读数和单个光束状态。功能•用于45MLA测量灯阵列的外部控制器•高度测量能力•快速反应时间和测量速度•可配置超高和悬垂输出•模拟模型提供与目标高度、宽度成比例的4…20 mA或0…10V输出,或位置•基本型号提供用于开/关应用的单个离散输出•I/O型号功能用于配置具有单独输出的四个高度区域的示教按钮•RS-485和CAN通信型号提供额外功能,包括:-连接到RS-485或CAN网络(按型号)-详细的高度信息-单个光束状态规格主题页将法语翻译添加到注意表1将法语翻译到重要表2型号类别。不模拟模型控制器45MLA-CTRLALG基本模型控制器45MLA-CTRL-BSC I/O模型控制器45ML A-CTRL RS-485控制器45MLA CTRL-485 CAN控制器45MLA-CTRL-CAN环境认证c-UL-us和CE标记适用于所有适用指令操作环境•外壳:IP54•接线板:IP20工作温度0…55°c(32…131°F)存储温度-25…+70°C(-13…+158°F)相对湿度15…95%光学状态指示器对准、目标存在、输出、输入、电源电压24V DC±15%(20.4…27.6V),最大(2级)纹波=5%电流消耗<300 mA,控制器的最大波束数,输出未连接传感器保护EN 61000-4-2、EN 61000-4-4和EN 61000-4-5;短路(SCP)、反极性和过载输出响应时间参见第2页上的响应时间输出类型NPN和PNP(推挽输出)输出模式暗操作(当连接为PNP时)输出电流最大150 mA每种输入类型下沉或源(跳线可选,默认用于连接至PNP输出)
ins the following new or updated information. This list includes substantive updates only and is not intended to reflect all changes. Translated versions are not always available for each revision. Description The 45MLA Light Array Controller drives the photoelectric elements in the light arrays, which are essentially a series of transmitted beam pairs. Five versions of the controller are available, each offering a different communications platform that can be selected to function with a range of programmable logic controllers (PLCs). The controller includes numerous application features, which allows for customization to the many applications. For instance, the I/O module can be used to configure up to four separate sensing zones with independent outputs and overhang/over-height detection. The basic model has an on/off output for use in discrete applications. The analog output model offers either a 4…20 mA current or 0…10V output proportional to target height, width, or position. The network communication models (RS-485 and CAN) can be used to communicate precise height readings and individual beam status. Features • External controller for 45MLA measuring light arrays • Height measuring capability • Fast reaction time and measurement speed • Configurable over-height and overhang outputs • Analog model offers either 4…20 mA or 0…10V output proportional to target height, width, or position • Basic models offer single discrete output for use in on/off applications • I/O model features Teach button for configuring four height zones with individual outputs • RS-485 and CAN communication models provide extra functionality, including: - Connection to RS-485 or CAN networks (by model) - Detailed height information - Individual beam status Specifications Topic Page Added French translation to Attention table 1 Added French translation to Important table 2 Model Cat. No. Analog Model Controller 45MLA-CTRL-ALG Basic Model Controller 45MLA-CTRL-BSC I/O Model Controller 45MLA-CTRL RS-485 Controller 45MLA-CTRL-485 CAN Controller 45MLA-CTRL-CAN Environmental Certifications c-UL-us and CE Marked for all applicable directives Operating environment • Housing: IP54 • Terminal strip: IP20 Operating temperature 0…55 °C (32…131 °F) Storage temperature -25…+70 °C (-13…+158 °F) Relative humidity 15…95% Optical Status indicators Alignment, target present, outputs, inputs, power Electrical Voltage 24V DC ±15% (20.4…27.6V), max (Class 2) ripple = 5% Current consumption <300 mA with maximum number of beams to controller, outputs not connected Sensor protection EN 61000-4-2, EN 61000-4-4, and EN 61000-4-5; short circuit (SCP), reverse polarity, and overload Outputs Response time See Response Time on page 2 Output type NPN and PNP (push-pull output) Output mode Dark operate (when connected as PNP) Output current 150 mA max each Input type Sinking or sourcing (jumper selectable, default is for connection to PNP output)