CLS208工控模块机器人备件
绿色状态：对准机械外壳材料铝透镜材料聚碳酸酯盖材料聚碳酸酯连接类型8针DC微型（M12）内螺纹QD，位于500 mm（20 in.）电缆尾光纤上（仅用于连接到45MLA控制器）附件提供的附件可调安装套件（445L-AF6143）所需附件（控制器）控制器模拟型号：45MLA-CTRL-ALG控制器基本型号：45MLA-CTRL-BSC控制器I/O型号：45MLA-CTRL控制器RS485:45MLA-CTRL-485控制器CAN:45MLAC-CTRL-CAN所需附件（灯阵列至控制器连接电缆）3 m M12-RJ45:445L-C8RJ3 5 m M12-RJ45：445L-C8RJ5 8 m M12-J445L-A8RJ8最大系统长度不能超过10 m（32.8 ft）可选附件可调平面安装支架：445L-A6149平面安装套件：445L-AF6145级联阵列延长跳线，M12 8针，3M:445L-AC8CPC3 2安装说明1。发射器和接收器轮廓都衬有连续的凹槽，以连接到安装支架，允许这些支架沿外壳长度连接在任何位置。注：也可单独购买平面安装套件。2.对准发射器和接收器，使两个单元彼此平行，并且带有光电传感器元件（和透明塑料透镜）的侧面彼此面对。3.请注意，接收器（蓝色连接器）可能对干扰光敏感。任何其他外部光源，包括任何光电传感器、阵列或反射表面的发射器，都不应指向接收器外壳。尽管45MLA能够承受明亮的阳光，但最好安装接收器外壳，使阳光不会直接照射到接收器透镜的弯曲前部区域。电气安装两个灯阵列必须通过RJ45连接器连接到控制器。Status Green: Alignment Mechanical Housing Material Aluminum Lens Material Polycarbonate Cover Material Polycarbonate Connection Types 8-pin DC micro (M12) female QD on 500 mm (20 in.) cable pigtail (for connection to 45MLA controller only) Accessories Supplied Accessories Adjustable mounting kit (445L-AF6143) Required Accessories (Controller) Controller Analog Model: 45MLA-CTRL-ALG Controller Basic Model: 45MLA-CTRL-BSC Controller I/O Model: 45MLA-CTRL Controller RS485: 45MLA-CTRL-485 Controller CAN: 45MLA-CTRL-CAN Required Accessories (Light array to controller connecting cable) 3 m M12—RJ45: 445L-AC8RJ3 5 m M12—RJ45: 445L-AC8RJ5 8 m M12—RJ45: 445L-AC8RJ8 Max. system length cannot exceed 10 m (32.8 ft) Optional Accessories Adjustable flat mounting bracket: 445L-AF6149 Flat mounting kit: 445L-AF6145 Cascadable array extension patchcord, M12 8-pin, 3M: 445L-AC8PC3 2 Mounting Instructions 1. Both the emitter and receiver profiles are lined with continuous grooves to attach to the mounting brackets, allowing these brackets to be attached at any position along the length of the housing. Note: A flat mounting kit is also available for purchase separately. 2. Align the emitter and receiver such that the two units are parallel to each other and the sides with the photosensor elements (and the clear plastic lenses) are facing each other. 3. Please note that the receiver (blue connector) can be sensitive to interference light. No other source of external light, including the emitters of any photoelectric sensor, array, or reflective surface, should be directed towards the receiver housing. Although the 45MLA is tolerant of bright sunlight, it is better practice to mount the receiver housing such that no sun light shines directly into the curved front area of the receiver lens. Electrical Installation Both light arrays must be connected to the controller through the RJ45 connectors.
