UAA326A04工控备件模块
所列编号不完整
从下表中选择线圈电压代码以完成。编号示例：产品选择安全接触器极交流和直流操作安全接触器电子线圈个主触点直接在线反馈电路的低功率辅助触点镜像触点性能 线圈电压代码和接口参见第页电子线圈接口订购带输入的线圈时，输入必须与输入一起使用交流直流电仅切换交流电机的额定工作电流额定值，每个接触器的辅助触点触点符合附录关于镜面触点性能的要求。目录号要订购内置接线片，请在目录号末尾添加字母例如电源电压接触器_自动化出版物年月，接触器线圈电压代码类别。所列编号不完整。从下表中选择线圈电压代码以完成。
编号示例：
附件电子线圈接口订购带输入的线圈时，输入必须与输入一起使用——仅说明连接，用于标准辅助触点类别。带顺序端子名称的侧面安装用辅助接触块数量极接触器上右侧或左侧安装的双向编号无需工具即可快速轻松安装主接触器极的镜像接触性能低功率切换至，左侧或右侧内部安装，左侧或右侧外部安装低功率辅助接触块，用于侧面安装，带有顺序端子名称极右侧或左侧安装在接触器上的双向编号无需工具即可快速轻松安装主接触器极的镜像接触性能电子兼容，*或*的外部不能安装辅助触点块。，左侧或右侧内侧或外侧安装
The listed number is incomplete
Select the coil voltage code from the following table to complete. Numbering example: product selection safety contactor pole AC and DC operation safety contactor electronic coil main contact direct online feedback circuit low power auxiliary contact mirror contact performance coil voltage code and interface refer to page Electronic coil interface When ordering coil with input, the input must be used together with the input AC and DC only to switch the rated working current rating of AC motor, The auxiliary contact of each contactor shall meet the requirements of the appendix on mirror contact performance. Catalog Number To order a built-in lug, add a letter at the end of the catalog number, such as a power voltage contactor_ Automation Publications Year, Contactor Coil Voltage Code Category. The numbers listed are incomplete. Select the coil voltage code from the following table to complete.
Numbering example:
When ordering a coil with an input at the accessory electronic coil interface, the input must be used with the input - only indicate the connection, for the standard auxiliary contact category. Side mounted auxiliary contact blocks with sequential terminal names Quantity pole Two way numbers installed on the right or left side of the contactor can be quickly and easily installed without tools Mirror contact performance of the main contactor pole Low power switching to, left or right internal installation, left or right external installation of low power auxiliary contact blocks for side installation, Two way numbers with serial terminal names on the right or left side of the pole installed on the contactor can be installed quickly and easily without tools. The mirror contact performance of the main contactor pole is electronic compatible. Auxiliary contact blocks cannot be installed outside of * or *., Left or right inner or outer mounting
