UFC911B110 3BHE037864R0110工控模块机器人备件
安装选项：
计算机正面8紧凑型工业非显示计算机自动化出版物6155RIN002EENP2013年7月安装计算机计算机支持各种安装选项：•壁装•DIN导轨安装•VESA安装每个安装选项都配有带安装螺钉的支架。将计算机安装在墙上您可以使用安装支架将计算机安装到墙上。壁装支架尺寸见第11页。1.在墙上钻四个M4孔，最小5 mm，与安装支架上的孔相对应。2.将安装支架连接到计算机的底部或背面（1）。3.用提供的M4 x 8 mm盘头螺钉（2）固定安装支架。将螺钉拧紧至0.686 N•m（6.072 lb•in）。
将计算机靠在墙上
将安装支架上的孔与墙上的孔对齐（3）。提示：用搁板或其他方式支撑计算机，以便于在适当的高度安装。底部紧凑型工业非显示计算机背面安装支架上的安装支架9自动化出版物6155RIN002EENP2013年7月5。将剩余的M4平头螺钉穿过安装支架插入墙壁并拧紧（4）。将计算机安装在DIN导轨上您可以将计算机安装到DIN导轨上。DIN导轨支架安装在计算机背面。DIN导轨支架尺寸见第11页。1.将DIN导轨支架连接到计算机背面（1）。2.固定DIN导轨支架，使用四个M4 x 5 mm平头螺钉；扭矩至0.686 N•m（6.072 lb•in）（2）。重要信息：请勿在高冲击和振动环境中将计算机安装在DIN导轨上。底部10台小型工业非显示计算机背面安装支架自动化出版物6155RIN002EENP2013年7月3。将DIN导轨连接并固定到安装表面（3）。4.将计算机安装在DIN导轨上。a、 将DIN导轨支架的上边缘插入DIN导轨的上边缘。
Installation options:
Computer front 8 Compact industrial non display computer automation publication 6155RIN002EENP July 2013 Installation Computer supports various installation options: • Wall mounting • DIN rail mounting • VESA mounting Each installation option comes with a bracket with mounting screws. Mounting the computer on the wall You can use the mounting bracket to mount the computer on the wall. See page 11 for wall mounting bracket dimensions. 1. Drill four M4 holes on the wall, minimum 5 mm, corresponding to the holes on the mounting bracket. 2. Connect the mounting bracket to the bottom or back of the computer (1). 3. Fix the mounting bracket with the M4 x 8 mm pan head screws (2) provided. Tighten the screws to 0.686 N • m (6.072 lb • in).
Place the computer against the wall
Align the holes in the mounting bracket with the holes in the wall (3). Tip: Support the computer with shelves or other means to facilitate installation at an appropriate height. Mounting bracket 9 on the back mounting bracket of the bottom compact industrial non display computer Automation publication 6155RIN002EENP July 5, 2013. Insert the remaining M4 pan head screws through the mounting bracket into the wall and tighten (4). Mounting the computer on a DIN rail You can mount the computer on a DIN rail. The DIN rail bracket is mounted on the back of the computer. See page 11 for DIN rail bracket dimensions. 1. Connect the DIN rail bracket to the back of the computer (1). 2. Fix the DIN rail bracket with four M4 x 5 mm pan head screws; Torque to 0.686 N • m (6.072 lb • in) (2). IMPORTANT: Do not mount the computer on a DIN rail in high shock and vibration environments. Bottom 10 small industrial non display computers Back mounting bracket Automation publication 6155RIN002EENP July 3, 2013. Attach and secure the DIN rail to the mounting surface (3). 4. Mount the computer on a DIN rail. a. Insert the top edge of the DIN rail bracket into the top edge of the DIN rail.
