UNS 3670A-ZV2 HIEE205011R0002机器人备件
使用推车的信息
有关如何组装和使用推车的信息请参阅 系列服务推车说明出版物。主题页在开始打开和检查模块之前阅读提升注意事项模块重量提升模块额外资源自动化出版物月日 预充电模块打开和提升说明打开和检查模件交付后按照以下步骤打开和检查组件。检查运输集装箱在运输过程中有无损坏。拆下运输集装箱的盖子。移除保护性包装材料。检查模块有无损坏。如果模块存在损坏请联系发货的承运人和自动化销售代表安排检查。保留所有产品包装以供承运人审查。阅读提升预防措施尝试前阅读这些预防措施以提升预充电模块。
模块重量
所有起重设备必须支持大约最大预充电模块重量 。重要信息自动化向承运人交付设备视为向买方交付。承运人对运输过程中发生的任何损坏负责。如果发现损坏买方有责任通知相关方。如果买方未能遵守这些步骤则买方将丧失任何赔偿损失或损害的权利。注意：用于提升模块的所有设备和硬件必须具有适当的尺寸和额定值以安全地提升和保持模块的重量。为防止可能的人身伤害或设备损坏：提升模块前检查所有硬件是否正确连接。不允许模块或提升设备的任何部分接触带电导体或部件。在提升或运输过程中请勿使模块高速加速或减速。
Information on using carts
For information on how to assemble and use the trolley, refer to the series of service trolley instruction publications. The topic page Read the lifting precautions before starting to open and check the module Weight Lifting module Additional resources Automation publication Month Day Precharge module opening and lifting instructions Opening and checking the module After delivery, follow the steps below to open and check the components. Inspect the shipping container for damage during transportation. Remove the cover of the shipping container. Remove protective packaging materials. Check the module for damage. If the module is damaged, please contact the shipping carrier and the automated sales representative to arrange an inspection. Keep all product packaging for carrier review. Read the lifting precautions before attempting to lift the precharge module.
Module weight
All lifting equipment must support approximately the maximum pre charge module weight. The delivery of important information automation equipment to the carrier shall be deemed as delivery to the buyer. The carrier shall be responsible for any damage occurring in the course of transportation. If damage is found, the Buyer shall be responsible for notifying the relevant parties. If the Buyer fails to follow these steps, the Buyer will lose any right to compensate for the loss or damage. Note: All equipment and hardware used to lift the module must be of appropriate size and rating to safely lift and maintain the weight of the module. To prevent possible personal injury or equipment damage: check that all hardware is properly connected before lifting the module. Do not allow any part of the module or lifting equipment to contact live conductors or parts. Do not accelerate or decelerate the module at high speed during lifting or transportation.
